What are Sensor Dry and Time Dry? - Daewoo DWR-WE6413RC Manual

What are Sensor Dry and Time Dry? - Daewoo DWR-WE6413RC Manual

Sponsored Links

How To Guide Manual Summary


Search in this Manual:

What are Sensor Dry and Time Dry? - Page 1

PRODUCT FEATURES DWR-WE5413WC/SC/RC DWR-WE6413WC/SC/RC Electric and Gas Dryer A NOTE TO YOU Thank you for purchasing a DAEWOO Dryer. Please read this manual carefully, as it provides instructions on safe installation, use, and maintenance Record the model and serial numbers,and retain the manual for future reference. For more information, please visit our website at http://www.e-daewoo.com " OUTSTANDING PERFORMANCE Besides the large capacity, you can benefit from faster drying time, quiet operation, and energy efficiency. " STAINLESS STEEL DRUM Stainless steel drum resists rust. " DIGITAL F..

IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS - Page 2

2 [SEEKING WARRANTY SERVICE] The warranty information for your dryer is located at the end of this manual. Warranty Service is available by contacting the nearest DAEWOO Service Center. If this product is installed and operated according to the instructions in this manual, DAEWOO will repair or replace any parts defective in material or workmanship throughout the warranty period, beginning with the date of purchase. Warranty Restriction : If the dryer is subjected to other than single family use, all warranty coverage is effective for only 90 days. You will need the complete model and seria..

TABLE OF CONTENTS - Page 3

3 ■ Type : Electric and Gas Dryer ■ Rating : Please refer to the rating label regarding detailed information. ■ Size : 27 x 32.4 x 40.1 inches ■ Capacity : 7.3 cu.ft. IEC, 10.4kg(22.9lb) ■ Weight : 128 Ibs (58.5 kg) ❈ Specifications are subject to change by manufacturer. PART 1. SPECIFICATIONS ............................................................................................................................ 3 PART 2. INITIAL STEPS FOR INSTALLING YOUR DRYER ........................................................................ 7 PART 3. ACCESSORIES INSTALLATION .........

[IMPORTANT SAFETY INSTRUCTIONS] - Page 4

4 [IMPORTANT SAFETY INSTRUCTIONS] 1) Read all instructions before using the appliance. 2) Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry- cleaning solvents, or other flammable or explosive substances, as they give off vapours that could ignite or explode. 3) Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 4) Before the appliance is removed from service or discarded, remove the door to the drying compartment. 5) Do not reach into the applia..

A. For a grounded, cord-connected appliance: - Page 5

5 [GROUNDING INSTRUCTIONS] A. For a grounded, cord-connected appliance: This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance must be equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a ..

California Safe Drinking Water and Toxic Enforcement Act - Page 6

6 California Safe Drinking Water and Toxic Enforcement Act This act requires the governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances. Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Properly adjusted dryers will minimize combustion. Exposure to these substances can be minimized furt..

INITIAL STEPS FOR INSTALLING YOUR DRYER - Page 7

7 The following instructions will guide you through the initial steps of setting up your dryer. Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use. More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are provided in other parts of this manual. Choose a location with a solid floor for your dryer. Place the dryer in the desired location and make sure that it has the r..

Closet Door - Page 8

8 Minimum clearances on above, behind, and sides of the unit, as shown below, are required. Those required minimum clearances are set forth in the picture below. Please keep the following instructions in mind when installing in a closet or recessed area: • Consider allowing additional clearance for installation and servicing. • Wall, door and floor molding may necessitate additional clearances. • Additional inches of clearance are recommended to reduce noise while operating. • Consider the space needed for companion appliances. • For closet installations, the picture below shows t..

Installation nstructions - Page 9

9 Open in position, adjust the leveling legs of the dryer until it is level from left to right and front to back. Be sure to tighten the leveling leg lock nuts against the bottom of the dryer. The leveling legs must remain firmly on the floor and the dryer should not rock. The maximum slope of the dryer from left to right or front to back should not exceed 1”(2.5 cm). If the dryer is not level, and if the slope exceeds 1” (2.5 cm), a load may not tumble properly and internal sensors may malfunction. NOTE: Other sections of this manual also provide important information concerning the pl..

STEP 2. Connecting the Exhaust System - Page 10

10 In addition to the following warnings, please refer to manual section on Exhaust Requirements and Maintenance. IMPORTANT: To reduce the risk of fire, combustion, and gas accumulation, the dryer must be vented to the outdoors. Please follow the instructions (and all others in this manual) very carefully. • Foil-type flexible ducts complied with the outline for clothes dryer transition duct, Subject UL 2158A, shall be used. • Do not use plastic or thin foil duct. • Use 4" (10.2 cm) diameter rigid or semi-rigid metal duct (NOTE! Venting materials are not supplied with the dryer, and y..

(Right side not available on Gas Dryers) - Page 11

11 ■ ALTERNATE EXHAUST DIRECTIONS 1. Remove screw and exhaust duct. 2-1. Detach and remove the knockout that matches the desired venting direction (Right side not available on Gas Dryers) 2-2. Reconnect the new duct[8.66 inch(22cm)] to the blower housing, and fixing the duct to the base. 3-1. Insert the male end of a 4" elbow into the female end of a short duct. Tape the joint. 3-2. Insert this assembly elbow first through the hole in the dryer and push the female end of the elbow onto the male end of the blower output shaft. Tape the joint.

..

STEP 3. Connection of Gas Supply - Page 12

12 STEP 3. Connection of Gas Supply (Gas dryer only). In addition to the following, please refer to manual section on Gas Requirements and Instructions. 1. New stainless steel flexible connector. Use this type of connector only if allowed by local codes. Use Design AGA Certified Connector. 2. 1/8" NPT Pipe Plug (for checking inlet gas pressure) 3. Equipment Shut-Off Valve Installed within 6’ (1.8 m) of dryer. 4. Iron Pipe. Shorter than 20’ (6.1 m) Use 3/8" pipe. Longer than 20’ (6.1 m) - Use 1/2" pipe. 5. 3/8" N.P.T. Gas Connection. 1. Confirm that the type of gas available in your la..

STEP 4. Electrical Plug Connections - Page 13

13 STEP 4. Electrical Plug Connections Following steps are several warnings and instructions concerning making the electrical connection for electric dryers. More detailed information concerning the electrical connection is provided in the manual section entitled Electrical Requirements for Electric Dryer. It is important that you thoroughly review that section and the remainder of this manual, before taking any steps to install or use this dryer. 1. Use only a new UL listed No. 10 (copper wire only) three or four conductor power supply cord kit rated 240 Volts (minimum) 30 Amperes and labe..

Confirming Heat Source in Gas Dryers - Page 14

14 STEP 5. Preparation of the Dryer Prior to the first use of this appliance, use all purpose cleaning products or a solution of detergent and water, with damp cloth to remove from the inside of the dryer drum/drying compartment any dust or dirt that may have accumulated inside the dryer. Plug-in your dryer after reviewing the following parts on your dryer’s Electrical Requirements. STEP 6. Confirming Heat Source Operation Confirming Heat Source in Gas Dryers Close the door to the dryer drum/drying compartment and, after completing all steps in this manual for proper installation of this ..

STEP 8. Procedure for Reversing the Door - Page 15

15 STEP 9. Additional Instructions for Installation of Your Dryer in a Manufactured or Mobile Home. The following instructions are applicable to installations of the dryer in a manufactured or mobile home. Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards Title 24 CFR, Part 32-80 or Standard CAN/CSA0Z240 MH and local codes and ordinances. If you are uncertain whether your proposed installation will comply with these standards, please contact a service and installation professional for assistance. (CONTACT INFORMATION :..

Caution! - Page 16

Caution! The dryer must be connected to the cold water faucet using the new inlet hose. Do not use old hoses Do not overtighten, as it may damage the coupling. 16 STEP10. Connecting the inlet water hose for steam features 1. Before installing dryer turn the cold water faucet off. 2. Attach the brass female end of the “Y” connector to the cold water wahser fi ll valve. 3. Connect the hose to cold waher faucet and “Y” connector 4. Connect straight end of hose which supplied with dryer accessory package to other end of “Y” connector 5. Connect angled end of hoses to fi ll the valve..

A : Uninstalling an electric dryer: - Page 17

17 Stacking Kit Installation Instructions(DRYER & PEDESTAL) To ensure safe and secure installation, please observe the instructions below. 1) Remove pedestal, installation hardware, and instructions are in the shipping carton. 2) Position dryer on top of the pedestal. A : Uninstalling an electric dryer: 1 Unplug the power supply cord, 2 Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet. B : Uninstalling a gas dryer: 1 Shut off gas. 2 Unplug power cord. 3 Disconnect gas line from dryer. ..

Instructions for Grounding of your Electric Dryer: - Page 18

18 The following are additional instructions regarding electrical connections and requirements for electric dryers. Instructions for Grounding of your Electric Dryer: a) This dryer must be connected to a grounded metal, permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer. b) The dryer has its own terminal block that must be connected to a separate 60 Hertz single phase AC circuit, fused at 30 Amperes (the circuit must be fused on both sides of the line). ELECTRICAL SERVICE ..

19 - Page 19

19 Review the following options to determine the appropriate electrical connection for your home: Use the instructions in this section if your home has a 4-wire receptacle (NEMA type 14-30R) and you will be using a UL listed, 120/240 volt minimum, 30 amp, dryer power supply cord. Use the instructions in this section if your home has a 3-wire receptacle (NEMA type 10-30R) and you will be using a UL listed, 120/240 volt minimum, 30 amp, dryer power supply cord. 4-wire receptacle (NEMA type14-30R) 3-wire receptacle (NEMA type10-30R) If this type is available at your home. you will be connectin..

4-wire connection : Direct wire - Page 20

20 Important : Grounding through the neutral conductor is prohibited for (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor. Prepare minimum 5 ft (1.52 m) of length in order for dryer to be replaced. First, peel 5 inches (12.7 cm) of covering material from end. Strip 5 inches of ground wire insulation. After cutting 11/2 inch (3.8 cm) from 3 other wires peel insulation back 1 inch (2.5 cm). Make ends of 3 wires a hook shape. Then, put the hooked shape end of the wire under the sc..

3-wire connection : Direct wire - Page 21

21 Important : Grounding through the neutral conductor is prohibited for (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor. Prepare minimum 5 ft (1.52 m) of length in order for dryer to be replaced. First, strip 3 1/2 inches (8.9 cm) of outer sheath from end and strip 1 inch of insulation from each conductor. 3-wire connection : Direct wire Then, put the hooked shape end of the wire under the screw of the terminal block (hooked end facing rightward) and pinch the hook together a..

Option 1: 4-wire connection with a power supply cord. - Page 22

22 • lf your local codes or ordinances do not allow the use of a 3-wire connection, or you are installing your dryer in a mobile home, you must use a 4-wire connection. 1. Connect neutral wire (white) of power cord to center terminal block screw. 2. Connect red and black wires to the left and right terminal block screws. 3. Connect ground wire (green) of power cord to external ground screw and move neutral ground wire of appliance and connect it to center screw. 4. Make sure that the strain relief screw is tightened. Be sure that all terminal block nuts are on tight and power cord is in r..

Option 2: 3-Wire connection with a power supply cord. - Page 23

23 lf your local codes or ordinances permit the connection of a frame-grounding conductor to the neutral wire, use these instructions. If your local codes or ordinances do not allow the connection of a frame-grounding conductor to the neutral wire, use the instructions under Section 1: Optional 3- wire connection. Option 2: 3-Wire connection with a power supply cord. • If your local codes or ordinances do not allow the connection of a frame-grounding conductor to the neutral wire, use the instructions under this section. 1. Connect neutral wire (white) of power cord to center terminal blo..

120 Volt, 60 Hertz, with 3-Prong Grounding Plug - Page 24

24 Following are additional instructions regarding electrical connections and requirements for gas dryers. 120 Volt, 60 Hertz, with 3-Prong Grounding Plug PART 5 ELECTRICAL REQUIREMENTS FOR GAS DRYERS Important Warning To help prevent fire, electric shock, serious injury or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1, and all applicable local regulations. Please contact a qualified electrician to check your home’s wiring and fuses to ensure that your home has adequate electrica..

GAS REQUIREMENTS AND INSTRUCTIONS - Page 25

25 1. Gas supply requirements: Liquefied Petroleum (L.P.) Gas (2,500 Btu/ft3 (93.1 MJ/m3)) service must be provided at 10 + 1.5 in. water column pressure. 2. A qualified technician must perform the LP gas coversion. Contact your local gas service branch if you require additional assistance or information. 3. Isolate the dryer from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply system at test pressure equal to or less than 2/1 psi (3.45 kPa). 4. Supply Line Requirements. Your laundry room must have a rigid gas supply..

Exhaust Requirements and Instructions: - Page 26

26 Maximum length of 4” (10.2 cm) diameter rigid metal duct 65 feet (19.8 m) 55 feet (16.8 m) 47 feet (14.3 m) 36 feet (11.0 m) 28 feet (8.5 m) 55 feet (16.8 m) 47 feet (14.3 m) 41 feet (12.5 m) 30 feet (9.1 m) 22 feet (6.7 m) Maximum length of 4” (10.2 cm) diameter flexible metal duct 45 feet (13.7 m) 35 feet (10.7 m) 30 feet (9.1 m) 25 feet (7.6 m) 20 feet (6.1 m) 35 feet (10.7 m) 27 feet (8.2 m) 21 feet (6.4 m) 17 feet (5.2 m) 15 feet (4.5m) Number of 90° Elbows 0 1 2 3 4 0 1 2 3 4 Weather Hood Type Recommended Use Only for Short RunInstallations NOTE: Deduct 6 feet (1.8 m) for each..

Exhaust and Dryer Maintenance - Page 27

27 Exhaust and Dryer Maintenance 1. After one year of use, the interior and complete exhaust system of the dryer should be examined and cleaned if necessary. 2. Before one year of use, when drying performance has become unsatisfactory, please examine and clean the exhaust duct for better drying performance. 3. Check the weather hoods frequently to ensure the dampers are moving freely, that the dampers are not pushed in and that nothing has been set against the dampers. 4. A qualified service person or company should be used to perform this maintenance. 5. A Flexible Metal Vent Kit, sold sep..

OPERATING YOUR DRYER - Page 28

28 WARNING! Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be air dried. Failure to follow these instructions can result in death or fire. WARNING! Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire. Following are instructions for starting and using your new dry..

Select cycles designed for option - Page 29

29 ■ Select cycles designed for option * When the course is set on reduce static, the cooling time will turn to 30 sec. A. If you select Rack Dry, the previous course and operation goes off. B. If you select Rack Dry, Anti Crease, Anti-Bacterial, or Damp-Dry-Beep is not available. Perm Press O O O O Bulky O O O O O Delicate O O O O Towel O O O O O Normal O O O O O Speed Dry O O O O O Steam Spray O O O Air Dry O O O O O Iron dry O O O Gym Shoes O O O O O Level Time Dry MoreTime LessTime Custom Program Rack Dry Anti Crease damp dry beep

..

Use this in drying running shoes. Gym shoes are dried - Page 30

30 • Use this button for power on or off. • Turn the knob to select the desired cycle based on laundry types and conditions. (1) Sensor Dry Cycles Sensor Dry Cycles allow you to match the cycle to the load you are drying. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying Bulky/Large Use for drying heavy fabrics such as quilts and blankets. Towels Use for drying denims, towels, heavy cottons. Normal Use for drying sturdy fabrics such as casual clothes. Perm. Press Use for..

EST. TIME REMAINING - Page 31

31 NOTE: Time change button is available only with Manual Dry, Time Dry and Rack Dry programs. NOTE: Don’t use the rack for normal tumble drying. The rack is shipped in place in your dryer. Please remove the rack before using this dryer for the first time. WARNING! For better drying performance and safety, clean lint filter every single use. • Press MORE TIME or LESS TIME until the desired drying time is set. 3 Time Change Button (1) Child Lock Child Lock can be used to prevent children from changing options on control panel while the dryer is running. When Child Lock is enabled, all th..

* Reset time as needed to complete drying. - Page 32

32 Low 20 20/30 50/30 50 20 Low/Ultra Low Air Dry/ Ultra Low Air Dry Air Dry * Reset time as needed to complete drying. Suggested Items for Rack Drying Temperature Setting Suggested Time* (Minutes) Washable wool items Stuffed toys with cotton or polyester fiber filling Stuffed toys, foam rubber filled. Foam rubber pillows Athletic shoes • Use Time Dry Option to change Drying Time on your own. You can select the desired operation time manually by pressing Time Dry button between 20 to 60 minutes. Type of Load Default Time* (Minutes) Foam rubber-pillows, padded bras, stuffed toys 20 - 30 20..

Starting your dryer - Page 33

33 Heavy Work Clothes 4 jeans 2 sweatpants 4 work pants 2 sweatshirts 4 work shirts Cotton/Towels 10 bath towels 14 wash cloths 10 hand towels Mixed Load 3 sheets 9 T-shirts 4 pillow cases 9 Shorts 3 shirts 10 handkerchiefs 3 blouses Following are sample loads for Super Capacity Dryers: NOTE: DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting MORE Dry or LESS Dry automatically adjusts the needed time which is already sensed. NOTE: DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting MORE Dry or LESS Dry automatically adjusts the sensed t..

34 - Page 34

34 4 To use a manual dry cycle • Select a Manual Dry Cycle. • Press MORE TIME or LESS TIME until the desired drying time is displayed. Tap MORE TIME or LESS TIME and the time will change by 1 minute interval. • Press TEMP. CONTROL until the desired temperature indicator glows. • (OPTIONAL STEP) If desired, select OPTIONS. For more details, see Options. • Press START/PAUSE. Be sure the door is closed. • If you do not press START/PAUSE within 10 minutes of selecting the cycle, the dryer will automatically shut off. • If you wish to end your drying cycle after pressing START/PAUS..

TROUBLESHOOTING GUIDE - Page 35

35 PART 9 TROUBLESHOOTING GUIDE Save time and money! Review the charts on the following pages first and you may not need to call for service. Question • Is the dryer plugged in? • Is the fuse blown, or is the circuit breaker tripped? What to Do Confirm that the dryer’s plug is securely and completely pushed into the laundry room’s power outlet. Check your home’s or laundry room’s fuse box/circuit breaker box and replace the fuse or reset the circuit breaker. (IMPORTANT: electric dryers generally use two fuses or breakers.) 1. Problem: My Dryer Won’t Start Question H1 H2 H5 H3(..

36 - Page 36

36 Question • Is your lint filter full? • Did you properly sort your load of laundry? • Do your clothes have excess static electricity? • Did you overload your dryer? • Did you place any paper, tissue, or other similar material in the load? What to Do Please refer to the manual section on cleaning the lint filter, and please confirm that the lint filter is clean. It is important that the lint filter is clean before each new load of laundry. In order to reduce the amount of lint in a load of laundry, sort lint producers (like a fuzzy white cotton towel) separately from clothes that..

9. Problem: It Takes Too Long For My Clothes To Dry - Page 37

37 Question • Did you properly sort your loads of laundry? • Are you drying large loads of heavy fabrics? • Are the dryer controls properly set? • Is the lint filter clean before each new load of laundry? • Are the exhaust ducts clear and properly configured? • Is the fuse blown, or is the circuit breaker tripped? • Did you overload your dryer? • Did you under load your dryer? What to Do Separate heavy weight items from light weight items when creating loads. Heavy fabrics take longer to dry because they tend to retain more moisture. To help reduce and maintain more consiste..

12. Problem: If the steam has something wrong - Page 38

38 • Water drips from nozzle when steam cycle starts. • Steam doesn’t generate but no error code is shown • Garments still wrinkled after Steam Spray • The drum does not turn during Steam cycle • Odors remain in clothing after Steam Spray • Top plate of the dryer is very warm Question This is the condensation of water. Dripping water will be stopped in the short time. Check if the cord of dryer is connected. If the steam doesn’t generate when the cord connection has no problem, call the service center. Check if the clothing quantity is so large and if the clothing is proper ..

DAEWOO DRYER LIMITED WARRANTY - USA - Page 39

DAEWOO DRYER LIMITED WARRANTY - USA Your DAEWOO will be will repaired or replaced, at DAEWOO's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") set forth below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This limited warranty is good only to the original purchaser of the product and effective only when used in the United States, including Hawaii, and U.S. Territories. W ARRANTY PERIOD : LABOR : ONE YEAR from the Date of Purchase. PART : ONE YEAR from the Date of Pu..

TEL: 730-0660 FAX: 730-3788 - Page 40

VISION CREATIVE, INC. 서울 종로구 통의동 6번지 이룸빌딩 4층 ABOUT THIS MANUAL ABOUT THIS MANUAL 담 당 전은일 님 브 랜 드 DAEWOO 언 어 영 어 B. MODEL DWR-WE5413WC/SC/RC DWR-WE6413WC/SC/RC M O D E L 미주향 DRYER MANUAL 일 정 1차 2차 3차 4차 제 판 한 인 쇄 MEMO 접수: (총39p) 연락처 VISION 담 당 방 문 수 TEL: 730-0660 FAX: 730-3788 11.09.16-표지 _ 신규 1p

..
PRODUCT FEATURES
DWR-WE5413WC/SC/RC
DWR-WE6413WC/SC/RC
Electric and Gas Dryer
A NOTE TO YOU
Thank you for purchasing a DAEWOO Dryer.
Please read this manual carefully, as it provides instructions
on safe installation, use, and maintenance
Record the model and serial numbers,and retain the manual for future reference.
For more information, please visit our website at http://www.e-daewoo.com
"
OUTSTANDING PERFORMANCE
Besides the large capacity, you can benefit from faster drying time, quiet
operation, and energy efficiency.
"
STAINLESS STEEL DRUM
Stainless steel drum resists rust.
"
DIGITAL FABRIC CARE
Multi-Level temperature control takes better care of your clothes.
"
EASE OF USE
An entire selection of user-friendly functions make operating the dryer
easier.
"
ONE TOUCH SELECTIONS
To choose an option, press its button once. No need to press buttons multiple times to scroll through a list
of options.
Your dryer provides sensor drying and time drying programs.
Sensor Dry
The dryer senses the dampness of the laundry and automatically determines the heat level and operation
time. You might see a sudden increase or decrease in operation time if the sensor determines more or less
drying is required. This is not a malfunction.
Time Dry
Use TIME DRY to select heat level and drying time manually. This can be used if clothes are not as dry as
you like them at the end of the cycle. Use TIME DRY for heavy and bulky items and thick work.
What are Sensor Dry and Time Dry?
CONTACT INFORMATION
Website :
Call :
1-877-393-7823(1-877-DWESVC3)