Camera User Guide - Canon PowerShot S95 Manual

Camera User Guide - Canon PowerShot S95 Manual

Sponsored Links

Camera User Guide Manual Summary


Search in this Manual:

Camera User Guide - Page 1

Camera User Guide ENGLISH • Make sure you read this guide, including the “Safety Precautions” section, before using the camera. • Store this guide safely so that you can use it in the future.

..

Checking the Package Contents - Page 2

2 Check if the following items are included in your camera package. If anything is missing, contact the retailer from which you purchased the camera. Checking the Package Contents Camera Interface Cable IFC-400PCU Battery Pack NB-6L (with Terminal Cover) Battery Charger CB-2LY/CB-2LYE Stereo AV Cable AVC-DC400ST Wrist Strap WS-DC9 Using the Manuals Also refer to the manuals on the DIGITAL CAMERA Manuals Disk. • Camera User Guide (This Guide) Once you have mastered the basics, use the camera’s many features to shoot more challenging photos. • Personal Printing Guide Read when you want ..

Read This First - Page 3

3 Test Shots and Disclaimer Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Warning Against Copyright Infringement The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright ..

What Do You Want to Do? - Page 4

4 What Do You Want to Do? 4 ● Shoot, leaving it to the camera to make settings ......................... 24 I w P At the beach (p. 62) Against snow (p. 62) Portraits (p. 61) Take good people shots J Landscape (p. 61) O Foliage (p. 62) Shoot various other scenes Low Light (p. 60) t Fireworks (p. 63) V Kids and pets (p. 62) S Underwater (p. 62) Miniature Effect (p. 72) Super vivid colors (p. 63) Poster Effect (p. 63) Fish-eye Effect (p. 71) Shoot with special effects Take pictures that looked aged (p. 70) Shoot ● Focus on faces ............................................................ ..

What Do You Want to Do? - Page 5

What Do You Want to Do? 5 1 ● Look at my pictures ...................................................................... 27 ● Automatically play back pictures (slideshow) ............................. 125 ● Look at my pictures on a TV ...................................................... 129 ● Look at my pictures on a computer .............................................. 32 ● Quickly search pictures ...................................................... 122 , 123 ● Erase pictures ...................................................................... 28 , 136 View E ● Shoot ..

Table of Contents - Page 6

6 Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter. Checking the Package Contents ....... 2 Read This First .................................. 3 What Do You Want to Do? ................ 4 Conventions Used in This Guide ....... 9 Safety Precautions ........................... 10 Charging the Battery ........................ 14 Compatible Memory Cards (Sold Separately) ...................................... 16 Inserting the Battery and Memory Card ........

Table of Contents - Page 7

Table of Contents 7 Shooting in Program AE ................. 74 Adjusting the Brightness (Exposure Compensation) ................................ 74 Turning the Flash On ...................... 75 Changing the Focusing Range (Macro) ............................................ 75 Changing the Recording Pixel Setting (Image Size) ....................... 76 Changing the Compression Ratio (Image Quality) ............................... 76 Shooting RAW Images .................... 78 Changing the Aspect Ratio ............. 79 Changing the ISO Speed ................ 80 Shooting Using a TV Monitor ..

Table of Contents - Page 8

Table of Contents 8 Quickly Searching Images ............. 122 Viewing Images in Filtered Playback ........................................ 123 Viewing Slideshows ....................... 125 Checking the Focus ....................... 126 Magnifying Images ......................... 127 Displaying Various Images (Smart Shuffle) .......................................... 127 Changing Image Transitions .......... 128 Viewing Images on a TV ................ 129 Viewing Images on a High-Definition TV .................................................. 130 Protecting Images ..........................

Conventions Used in This Guide - Page 9

9 • Icons are used in the text to represent the camera buttons and control dial. • Language that displays on the screen appears inside [ ] (square brackets). • The directional buttons, control dial, FUNC./SET button and control ring are represented by the following icons. • : Things you should be careful about • : Troubleshooting tips • : Hints for getting more out of your camera • : Supplemental information • (p. xx): Reference pages (“xx” stands for a page number) • This guide assumes all functions are at their default settings. • The various types of memory cards ..

Safety Precautions - Page 10

10 • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death. • Do not trigger the flash in close proximity to human eyes. Exposure to the intense light produced by the flash could damage eyesight. In parti..

Denotes the possibility of injury. - Page 11

Safety Precautions 11 • Use only the recommended battery. • Do not place the battery near or in direct flame. • Unplug the power cord periodically and wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area. • Do not handle the power cord with wet hands. • Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet. • Do not allow dirt or metal objects (such as pins or keys) ..

Denotes the possibility of damage to the equipment. - Page 12

Safety Precautions 12 Caution Denotes the possibility of damage to the equipment. • Do not aim the camera at bright light sources (the sun, etc.). Doing so may damage the image sensor. • When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera. • Do not forcibly push down or pull up the flash. This may cause the camera to malfunction. • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please us..

Attaching the Strap/Holding the Camera - Page 13

13 Getting Started This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching the Strap/Holding the Camera • Be sure to attach the supplied strap to the camera and wrap it around your wrist when shooting to avoid dropping the camera. The strap can also be attached to the left side of the camera. • Keep your arms tight against your body while holding the camera firmly by the sides. Be sure that your fingers..

Charging the Battery - Page 14

14 Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase. Remove the cover. Insert the battery. ● Align the o marks on the battery and charger, then insert the battery by sliding it in ( ) and down ( ). Charge the battery. ● For CB-2LY: Flip out the plug ( ) and plug the charger into a power outlet ( ). ● For CB-2LYE: Plug the power cord into the charger, then plug the other end into a power outlet. X The charge lamp lights orange and charging starts. X The charge lamp will light green when charging has finished. Cha..

Approximate Number of Shots That Can Be Taken - Page 15

Charging the Battery 15 Approximate Number of Shots That Can Be Taken • The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard. • Under some shooting conditions, the number of shots that can be taken may be less than mentioned above. Battery Charge Indicator An icon or message will appear on the screen indicating the battery’s charge state. Number of Shots Approx. 200 Playback Time Approx. 5 hrs. Display Summary Sufficient charge. Slightly depleted, but sufficient. (Blinking red) Nearly depleted. Charge the battery. ..

Compatible Memory Cards (Sold Separately) - Page 16

16 • SD memory cards (2 GB and less)* • SDHC memory cards (more than 2 GB, up to and including 32 GB)* • SDXC memory cards (more than 32 GB)* • MultiMediaCards • MMC plus memory cards • HC MMC plus memory cards • Eye-Fi Cards * This memory card complies with the SD standards. Some cards may not operate properly depending on the brand of card used. About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is require..

What if [Memory card locked] appears on the screen? - Page 17

Inserting the Battery and Memory Card 17 Open the cover. ● Slide the cover ( ) and open it ( ). Insert the battery. ● Insert the battery as shown until it locks into place with a click. ● Be sure to insert the battery in the correct direction or it will not properly lock into place. Insert the memory card. ● Insert the memory card as shown until it locks into place with a click. ● Be sure the memory card is oriented correctly. Inserting the memory card in the wrong direction could damage the camera. Close the cover. ● Close the cover ( ), and press downward as you slide it until..

Can you check the number of shots that can be taken? - Page 18

Inserting the Battery and Memory Card 18 Removing the Battery and Memory Card Remove the battery. ● Open the cover and press the battery lock in the direction of the arrow. X The battery will pop up. Remove the memory card. ● Push the memory card in until you hear a click, then slowly release it. X The memory card will pop up. Approximate Number of Shots per Memory Card • Values are based on the default settings. • The number of shots that can be taken will vary depending on camera settings, the subject and the memory card used. Memory Card 4 GB 16 GB Number of Shots 1471 6026 Can y..

Reappearing Date/Time screen - Page 19

19 The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. ● Press the ON/OFF button. X The Date/Time screen will appear. Set the date and time. ● Press the qr buttons to choose an option. ● Press the op buttons or turn the Ê dial to set a value. Complete the setting. ● Press the m button. X Once the date and time have been set, the Date/Time screen will close. ● Pressing the ON/OFF button will turn off the camera. Setting the Date an..

Changing the Date and Time - Page 20

Setting the Date and Time 20 Changing the Date and Time You can change the current date and time settings. Display the menus. ● Press the n button. Choose [Date/Time] in the 3 tab. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [Date/Time], then press the m button. Change the date and time. ● Follow Steps 2 and 3 on p. 19 to adjust the setting. ● Pressing the n button will close the menu. Date/Time battery • The camera has a built-in date/time battery (backup battery) that allows the date/time settings to be retained for about th..

What if the clock appears when the - Page 21

21 You can change the language that displays on the screen. Enter Playback mode. ● Press the 1 button. Display the settings screen. ● Press and hold the m button, then immediately press the n button. Set the display language. ● Press the opqr buttons or turn the Ê dial to choose a language, then press the m button. X Once the display language has been set, the settings screen will close. Setting the Display Language What if the clock appears when the m button is pressed? The clock will appear if too much time passes between pressing the m button and the n button in Step 2. If the clo..

Formatting Memory Cards - Page 22

22 Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Before formatting an Eye-Fi card (p. 171) , be sure to install the software contained on the card to a computer. Display the menu. ● Press the n button. Choose [Format]. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [Format], then pr..

Pressing the Shutter Button - Page 23

Pressing the Shutter Button 23 To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then press fully to shoot. Press halfway (Press lightly to focus). ● Press lightly until the camera beeps twice and AF frames appear where the camera focused. Press fully (Press fully to shoot). X The camera plays the shutter sound and takes the shot. ● Since the shot is being taken while the shutter sound plays, be careful not to move the camera. Formatting or erasing data on a memory card merely changes the file management information on the card and d..

Taking Pictures (Smart Auto) - Page 24

24 Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels. Turn on the camera. ● Press the ON/OFF button. X The start-up screen will appear. Choose A mode. ● Set the mode dial to A . ● When you point the camera toward the subject, the camera will make a slight noise as it determines the scene. X The icon for the determined scene will appear in the upper right of the screen. X The camera will f..

What if an icon appears in the upper right of the screen? - Page 25

Taking Pictures (Smart Auto) 25 Focus. ● Press the shutter button halfway to focus. X The flash will rise automatically in dark environments. X When the camera focuses, it will beep twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point. Shoot. ● Press the shutter button fully to shoot. X The camera will play the shutter sound and shoot. The flash will automatically fire in low light conditions if it has been raised. X The image will appear on the screen for about two seconds. ● You can take a second pictu..

Taking Pictures (Smart Auto) - Page 26

Taking Pictures (Smart Auto) 26 What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (p. 179) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (p. 74) . • What if white and gray frames appear when you point the camera toward a subject? When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range (p. 88) . If the main subject moves, however, the gray frames will ..

Switching to Shooting mode - Page 27

27 You can view the images you have taken on the screen. Enter Playback mode. ● Press the 1 button. X The last image you took will appear. Choose an image. ● Pressing q or turning the Ê dial counter- clockwise will cycle through the images in the reverse order they were taken, from the newest image to the oldest. ● Pressing r or turning the Ê dial clockwise will cycle through images in the order they were taken, from oldest to newest. ● The images change more quickly if you keep the qr buttons pressed, but they will appear coarse. ● The lens will retract after approximately 1 mi..

Enter Playback mode. - Page 28

28 You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. ● Press the 1 button. X The last image you took will appear. Choose an image to erase. ● Press the qr buttons or turn the Ê dial to display an image to erase. Erase the image. ● Press the p button. ● Press the qr buttons or turn the Ê dial to choose [Erase], then press the m button. X The displayed image will be erased. ● To exit instead of erasing, press the qr buttons or turn the Ê dial to choose [Cancel]..

Shooting Movies - Page 29

29 The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button. The audio will record in stereo. Enter E mode. ● Set the mode dial to E . Compose the shot. ● Moving the zoom lever toward i will zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller. ● You can turn the Ï ring to zoom in on your subject (Step Zoom, p. 57 ). Focus. ● Press the shutter button halfway to focus. X When the camera focuses, it will beep twice. Shoot. ● Press the shutter but..

Magnifying the subject while shooting - Page 30

Shooting Movies 30 X Recording will start, and [ Rec] and the elapsed time will appear on the screen. ● Once shooting begins, take your finger off the shutter button. ● If you change the composition of your shot during shooting, the focus will stay the same, but the brightness and tone will automatically adjust. ● Do not touch the microphone while shooting. ● Do not press any buttons other than the shutter button while shooting. The sound the buttons make will be recorded in the movie. Stop shooting. ● Fully press the shutter button fully again. X The camera will beep once and sto..

What if you can’t play back movies on a computer? - Page 31

31 You can view the movies you have shot on the screen. Enter Playback mode. ● Press the 1 button. X The last image you took will appear. X appears on movies. Choose a movie. ● Press the qr buttons or turn the Ê dial to choose a movie, then press the m button. X The movie control panel will appear on the screen. Play the movie. ● Press the qr buttons or turn the Ê dial to choose (Play), then press the m button. X The movie will play. ● You can pause/resume the movie by pressing the m button. ● Press the op buttons to adjust the volume. X After the movie finishes, appears. Viewin..

Transferring Images to a Computer for Viewing - Page 32

32 You can use the included software to transfer images you have shot with the camera to a computer for viewing. If you are already using software included with another Canon-brand compact digital camera, install the software from the included CD-ROM, overwriting your current installation. System Requirements Windows * For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time depending on your computer’s capabilities. Macintosh OS Windows 7 Windows Vista Service Pack 1 and 2 Windows XP Service Pack 3 Computer model The above OS ..

Transferring Images to a Computer for Viewing - Page 33

Transferring Images to a Computer for Viewing 33 Preparations Windows Vista and Mac OS X (v10.5) are used for these explanations. Install the Software. Windows Place the CD in the computer’s CD- ROM drive. ● Place the supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) into the computer’s CD-ROM drive. Begin installation. ● Click [Easy Installation] and follow the on-screen instructions to proceed with the installation. ● If the [User Account Control] window appears, follow the on-screen instructions to proceed. When the installation finishes, click [Restart] or [Finish]. Remove..

Transferring Images to a Computer for Viewing - Page 34

Transferring Images to a Computer for Viewing 34 Connect the camera to the computer. ● Turn off the camera. ● Open the cover and insert the small plug of the included interface cable (p. 2) firmly into the camera terminal in the direction shown. ● Insert the interface cable’s larger plug into the computer. For connection details, refer to the user guide provided with the computer. Turn on the camera. ● Press the 1 button to turn on the camera. Open CameraWindow. Windows ● Click [Downloads Images From Canon Camera using Canon CameraWindow]. X CameraWindow will appear. ● If Came..

Transferring Images to a Computer for Viewing - Page 35

Transferring Images to a Computer for Viewing 35 Transfer and View Images ● Click [Import Images from Camera], and then click [Import Untransferred Images]. X All images not previously transferred will transfer to the computer. Transferred images will be sorted by date and saved in separate folders in the Pictures folder. ● When [Image import complete.] appears, click [OK], then click [X] to close CameraWindow. ● Turn off the camera and unplug the cable. ● For details on how to view images using a computer, refer to the Software Guide . For Windows 7, use the following steps to disp..

Transferring Images to a Computer for Viewing - Page 36

Transferring Images to a Computer for Viewing 36 You can transfer images even without using the image transfer function in the included software by simply connecting your camera to a computer. There are, however, the following limitations. • It may take a few minutes from when you connect the camera to the computer until you can transfer images. • Images shot in the vertical orientation may be transferred in the horizontal orientation. • RAW images, or JPEG images recorded at the same time as RAW images, may not transfer. • Protection settings for images may be lost when transferred..

Canon-Brand PictBridge Compliant Printers - Page 37

37 Accessories Wrist Strap WS-DC9 Interface Cable IFC-400PCU* DIGITAL CAMERA Solution Disk Stereo AV Cable AVC-DC400ST* Supplied with Camera Battery Pack NB-6L with Terminal Cover* Battery Charger CB-2LY/CB-2LYE* USB card reader Windows/Macintosh Memory Card Canon-Brand PictBridge Compliant Printers TV High-Definition TV HDMI Cable HTC-100 *Also available for purchase separately.

..

Battery Charger CB-2LY/CB-2LYE - Page 38

38 The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Power Supplies Battery Charger CB-2LY/CB-2LYE ● An adapter for charging Battery Pack NB-6L. Battery Pack NB-6L ● Rechargeable lithium-ion battery. AC Adapter Kit ACK-DC40 ● This kit lets you power the camera using household power. Recommended for powering the camera for an extended period of time or when connecting to a computer or printer. Cannot be used to charge the camera battery. Separately Sold Accessories Using Accessories Abroad The battery cha..

Separately Sold Accessories - Page 39

Separately Sold Accessories 39 Flash High-Power Flash HF-DC1 ● This externally mounted flash can be used to capture photographic subjects that are too distant for the built-in flash to illuminate. Other Accessories Waterproof Case WP-DC38 ● Use this case to take underwater shots at depths of up to 40 meters (130 ft.), or to shoot in the rain, at the beach, or on the ski slopes. Waterproof Case Weight WW-DC1 ● When using the Waterproof Case to take photographs underwater, the weights prevent the case from floating. HDMI Cable HTC-100 ● Use this cable to connect the camera to the HDMI..

Canon-Brand PictBridge Compliant - Page 40

Separately Sold Accessories 40 Printers Canon-Brand PictBridge Compliant Printers ● By connecting your camera to a Canon- brand PictBridge compliant printer, you can print your images without having to use a computer. For more information, visit your nearest Canon retailer. SELPHY series Inkjet Printers Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon ..

Learning More - Page 41

41 Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions. 2

..

Use the mode dial to change the Shooting mode. - Page 42

42 Mode Dial Use the mode dial to change the Shooting mode. Components Guide Zoom Lever Shooting: i (Telephoto) / j (Wide Angle) (pp. 24 , 29 , 55) Playback: k (Magnify) / g (Index) (pp. 122 , 127) Lamp (pp. 59 , 64 , 65 , 66 , 162 , 163) Lens Microphone (p. 30) Mode Dial Shutter Button (p. 23) ON/OFF button (p. 19) RING FUNC. (Ring Function Selector) Button (p. 101) Flash (pp. 25 , 54 , 75) Control Ring (pp. 24 , 101) Tripod Socket Memory Card / Battery Cover (p. 17) DC Coupler Terminal Cover (p. 170) Movie Mode For shooting movies (pp. 29 , 113) . Special Scene Mode You can shoot with the..

Components Guide - Page 43

Components Guide 43 Control Dial Turning the control dial allows you to perform operations such as choosing items or switching images. Except for a few operations, the same operations are possible with the opqr buttons. Strap Mount (p. 13) Screen (LCD Monitor) (pp. 44 , 178 , 180) Indicator (p. 45) (Short Cut) Button (p. 166) / c (Direct Print) (p. 148) 1 (Playback) Button (pp. 27 , 121) Speaker HDMI Terminal (p. 130) A/V OUT (Audio/Video Output) / DIGITAL Terminal (pp. 34 , 129 , 148) n Button (p. 47) l (Display) Button (p. 44) b (Exposure Compensation) (p. 74) / d (Jump) (p. 123) / o Butt..

Switching the Display - Page 44

44 Switching the Display You can change the screen display using the l button. Refer to p. 178 for details on information that appears on the screen. Shooting Playback Screen Display in Dark Shooting Conditions The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded i..

Histogram during Playback - Page 45

Indicator 45 Histogram during Playback ● The graph that appears in “Detailed Information Display” (p. 44) is called the histogram. The histogram shows the distribution of brightness in an image horizontally, and the amount of brightness vertically. When the graph approaches the right side, the image is bright, but when it approaches the left side, the image is dark, and in this way you can judge the exposure. ● The histogram can also be displayed while shooting (p. 164) . RGB Histogram ● If you press the o button in “Detailed Information Display”, the RGB histogram will appear..

FUNC. Menu – Basic Operations - Page 46

46 You can set commonly used functions using the ø menu. The menu items and options differ depending on the Shooting mode (pp. 182 – 183) . Choose a Shooting mode. ● Set the mode dial to the desired shooting mode. Display the ø menu. ● Press the m button. Choose a menu item. ● Press the op buttons to choose a menu item. X The available options for the menu item appear in the lower part of the screen. Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option. ● You can also choose settings by pressing the l button on options that display . Complete the se..

MENU – Basic Operations - Page 47

47 Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting ( 4 ) and playback ( 1 ). The options differ depending on the Shooting mode and the Playback mode (pp. 184 – 187) . Display the menu. ● Press the n button. Choose a tab. ● Press the qr buttons, or move the zoom lever left or right to choose a tab. Choose an item. ● Press the op buttons or turn the Ê dial to choose an item. ● Some items require you to press the m or r button to display a submenu in which you change the setting. Choose an option. ● Press the qr buttons to..

You can also mute camera sounds by holding down the - Page 48

48 You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. ● Press the n button. Choose [Mute]. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [Mute], then press the qr buttons to choose [On]. ● Press the n button to restore the normal screen. Adjusting the Volume Display the menu. ● Press the n button. Choose [Volume]. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [Volume], then press the m button. Change the volume. ● Press the op buttons or t..

Changing the Screen Brightness - Page 49

49 The screen brightness can be changed in two ways. Using the Menu Display the menu. ● Press the n button. Choose [LCD Brightness]. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [LCD Brightness]. Change the brightness. ● Press the qr buttons to change the brightness. ● Press the n button twice to restore the normal screen. Using the l Button ● Press the l button for more than one second. X The screen increases to maximum brightness regardless of the setting in the 3 tab. ● Pressing the l button again for more than one second ..

Are there functions that cannot be reset? - Page 50

50 When you have mistakenly changed a setting, you can reset the camera to the default settings. Display the menu. ● Press the n button. Choose [Reset All]. ● Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the Ê dial to choose [Reset All], then press the m button. Reset the settings. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. X The camera will reset to the default settings. Returning the Camera to Default Settings Are there functions that cannot be reset? • The [Date/Time] (p. 20) in the 3 tab, [Language] (p. 21) ..

Power Saving Function (Auto Power Down) - Page 51

51 To save battery power, the screen turns off, and the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The screen will turn off approximately 1 minute after the camera is last operated. After about 2 more minutes, the lens will retract and the power will turn off. When the screen has turned off but the lens has not yet retracted, pressing the shutter button halfway (p. 23) turns on the screen and shooting can continue. Power Saving during Playback The power will turn off approximately 5 minutes after the camera is last operated. Perf..

Choose [Low Level Format]. - Page 52

Clock Functions 52 Choose [Low Level Format]. ● Press the op buttons or turn the Ê dial to choose [Low Level Format], then press the qr buttons to display . ● Press the opqr buttons or turn the Ê dial to choose [OK], then press the m button. Start the low level format. ● Press the op buttons or turn the Ê dial to choose [OK], then press the m button. X Low level formatting starts. X When low level formatting ends, [Memory card formatting complete] will appear. Complete the low level format. ● Press the m button. You can check the current time. ● Press and hold the m button. X T..

Shooting with Commonly - Page 53

53 Shooting with Commonly Used Functions This chapter explains how to shoot in different conditions, as well as how to use common functions, such as the self-timer, and turn off the flash. • This chapter assumes the camera is set to A mode for “Turning the Flash Off” (p. 54) to “Using the Self-Timer” (p. 59) . When shooting in a mode other than A , check which functions are available in that mode (pp. 182 – 183) . • “Shooting in Low Light Conditions (Low Light)” (p. 60) to “Take Shots That Look Like a Miniature Model (Miniature Effect)” (p. 72) assumes that the corresp..

What if the indicator blinks orange and a flashing - Page 54

54 You can shoot with the flash turned off. Press the r button. Choose ! . ● Press the qr buttons or turn the Ê dial to choose ! , then press the m button. X If the flash has been raised, the flash will lower automatically. X Once set, ! will appear on the screen. ● To turn the flash back on, follow the Steps above to return the setting to . Turning the Flash Off What if the indicator blinks orange and a flashing appears? When you press the shutter button halfway in low light conditions where camera shake is likely, the indicator will blink orange and a flashing will appear on the scre..

What if the zoom factor appears in blue? - Page 55

55 You can use the digital zoom to zoom up to approximately 15x and capture subjects that are too far away for the optical zoom to enlarge. The images may appear coarse, however, depending on the recording pixel setting (p. 76) and the zoom factor used. Move the zoom lever toward i . ● Hold the lever until zooming stops. X The zoom will stop when the largest possible zoom factor without image deterioration has been reached, and the zoom factor will appear when you release the zoom lever. Move it toward i again. X The digital zoom will zoom in even further on the subject. Zooming in More C..

Zooming in More Closely on Subjects (Digital Zoom) - Page 56

Zooming in More Closely on Subjects (Digital Zoom) 56 Digital Tele-Converter The focal length of the lens can be increased by approx. 1.4x or approx. 2.3x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. The images may appear coarse, however, depending on the combination of recording pixel (p. 76) and digital tele-converter settings used. Choose [Digital Zoom]. ● Press the n button. ● Press the qr buttons to choose the 4 tab. ● Press the op buttons or turn the Ê dial to choose [Digital ..

Shoot Using Preset Focal Lengths - Page 57

57 You can shoot using preset focal lengths of 28 mm, 35 mm, 50 mm, 85 mm or 105 mm (35mm film equivalents). This feature is useful when you want to shoot at a particular focal length. Choose a focal length. ● Turn the Ï ring. X Turn the Ï ring counter clockwise until you hear a clicking sound and the focal length changes from 28 mm to 35 mm. If you continue to turn the Ï ring, the focal length will be set to 50 mm, 85 mm, and 105 mm. Shoot Using Preset Focal Lengths (Step Zoom) While in digital zoom (p. 55) , turning the Ï ring counterclockwise will not change the zoom settings. Howe..

Inserting the Date and Time - Page 58

58 You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 19) . Choose [Date Stamp]. ● Press the n button. ● Press the qr buttons to choose the 4 tab. ● Press the op buttons or turn the Ê dial to choose [Date Stamp]. Accept the setting. ● Press the qr buttons to choose [Date] or [Date & Time]. ● Pressing the n button will restore the shooting screen. X Once set, [DATE] will appear on the screen. Shoot. X The shooting date or time w..

Using the Self-Timer - Page 59

59 Use the self timer for pictures where the photographer is also included in the shot. You can set the time delay between when the shutter button is pressed and the shot is taken (0 – 30 seconds) and also the number of shots (1 – 10 shots). Press the p button. Choose . ● Press the op buttons or turn the Ê dial to choose , then press the m button. ● Immediately turn the Ï ring to choose the time delay, then press the qr buttons to choose the number of shots and press the m button. X Once set, will appear on the screen. Shoot. ● Press the shutter button halfway to focus on the su..

What if the number of shots is set to two or more shots? - Page 60

Shooting in Low Light Conditions (Low Light) 60 Allows you to shoot in dimly lit places with reduced camera shake and subject blur. Enter mode. ● Set the mode dial to . Shoot. What if the number of shots is set to two or more shots? • Exposure and white balance settings are set with the first shot. • If the flash fires or you set a high number of shots, the shooting interval may take longer than usual. • If the memory card becomes full, shooting stops automatically. When you set the time delay for more than 2 seconds, the self-timer lamp and sound speed up 2 seconds before the shutt..

Shooting in Various Conditions - Page 61

61 The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Enter K mode. ● Set the mode dial to K . Choose the Shooting mode. ● After pressing the m button, press the op buttons to choose I . ● Press the qr buttons or turn the Ê dial to choose a Shooting mode, then press the m button. Shoot. I Take portraits (Portrait) ● Produces a soft effect when photographing people. J Take landscapes (Landscape) ● Lets you shoot majestic landscapes with a real sense of depth. Shooting in Various Conditions

..

Shooting in Various Conditions - Page 62

Shooting in Various Conditions 62 V Take shots of kids and pets (Kids&Pets) ● Lets you capture subjects that move around, such as children and pets, without missing photo opportunities. ● You will be able to focus on subjects that are approx. 1 meter (3.3 ft.) or more away from the end of the lens. w Take shots of people at the beach (Beach) ● Lets you take shots of brightly lit people on sandy beaches where the reflected sunlight is strong. S Shoot underwater (Underwater) ● Lets you take natural-colored shots of aquatic life and underwater scenery when used with Waterproof Case..

Shooting in Various Conditions - Page 63

Shooting in Various Conditions 63 t Take shots of fireworks (Fireworks) ● Lets you take shots of fireworks in vivid colors. Adding Effects and Shooting Shoot images with vivid colors (Super Vivid) ● Lets you take shots with vivid, intense colors. Take posterized shots (Poster Effect) ● Lets you take shots that look like an old poster or illustration. In t mode, attach the camera to a tripod to prevent the camera from moving and blurring the image. Additionally, you should set the [IS Mode] to [Off] when shooting with a tripod (p. 165) . In V or S mode, images may appear coarse because..

What if a smile is not detected? - Page 64

64 The camera will shoot, even without pressing the shutter button, when it detects a smile. Choose . ● Follow Steps 1 – 2 on p. 61 to choose , then press the l button. ● Press the qr buttons or turn the Ê dial to choose , then press the l button. X The camera will enter shooting stand-by, and [Smile Detection on] will appear on the screen. Point the camera at a person. ● Each time the camera detects a smile it will shoot after the lamp lights. ● Pressing the p button will pause smile detection. Press the p button again to resume smile detection. Detecting a Smile and Shooting Wh..

What if a wink is not detected? - Page 65

65 Point the camera at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink. Choose . ● Follow Steps 1 – 2 on p. 61 to choose , then press the l button. ● Press the qr buttons or turn the Ê dial to choose , then press the l button. Compose the shot and press the shutter button halfway. ● Confirm that a green frame appears around the face of the person who will wink. Press the shutter button fully. X The camera will enter shooting stand-by, and [Wink to take picture] will appear on the screen. X The lamp will blink and ..

Changing the number of shots - Page 66

Using the Face Self-Timer 66 The shutter will release approximately two seconds after the camera detects a new face (p. 88) . You can use this when the photographer wants to be in the image, such as a group photo. Choose . ● Follow Steps 1 – 2 on p. 61 to choose , then press the l button. ● Press the qr buttons or turn the Ê dial to choose , then press the l button. Compose the shot and press the shutter button halfway. ● Make sure a green frame appears on the face focused on and white frames appear on other faces. Press the shutter button fully. X The camera will enter shooting st..

Join the subjects and look at the - Page 67

Using the Face Self-Timer 67 Join the subjects and look at the camera. X When the camera detects a new face, the lamp and sound will speed up (the lamp remains lit when the flash will fire), and two seconds later the shutter will release. ● To cancel shooting with the timer after countdown has started, press the p button. Changing the number of shots After choosing in Step 1, press the op buttons. Even if your face is not detected after joining the subjects, the shutter will release approximately 15 seconds later.

..

Shooting High Contrast Scenes - Page 68

68 The camera takes three successive shots at different brightness settings, then selects and combines the areas with the best brightness into one image. This lets you reduce highlight blowout and loss of details in shadow areas commonly found in high contrast scenes. Choose . ● Follow Steps 1 – 2 on p. 61 to choose . Secure the camera. ● Attach the camera to a tripod to prevent the camera from moving and blurring the image. Shoot. X The camera will combine the three shots it took after you pressed the shutter button fully. Shooting High Contrast Scenes (High Dynamic Range) You should..

Shooting High Contrast Scenes (High Dynamic Range) - Page 69

Shooting High Contrast Scenes (High Dynamic Range) 69 Adding Color Effects Choose a color effect. ● Follow Steps 1 – 2 on p. 61 to choose . ● After pressing the l button, press the qr buttons or turn the Ê dial to choose a color effect, then press the l button again. Color Effects Effect Off — Sepia Sepia tones. B/W Black and white. Super Vivid Lets you take shots with vivid, intense colors. Poster Effect Lets you take shots that look like an old poster or illustration.

..

Shooting with Faded Colors (Nostalgic) - Page 70

70 This effect fades the colors and roughens the image so that it looks like an old photograph. You can choose from 5 effect levels. Choose . ● Follow Steps 1 – 2 on p. 61 to choose . Choose the effect level. ● Turn the Ï ring to choose the effect level. Shoot. Shooting with Faded Colors (Nostalgic) • Digital Zoom (p. 55) , date stamp (p. 58) , and red-eye correction (p. 105) are not available. • In the shooting screen, the colors will change, but the roughening effect will not show. You can check this effect in image playback (p. 27) . • In some cases, you may not obtain the e..

Shoot with the Effects of a Fish-Eye Lens - Page 71

71 Lets you shoot with the distorting effect of a fish-eye lens. Choose . ● Follow Steps 1 – 2 on p. 61 to choose . Choose an effect level. ● Press the l button. X [Effect Level] will appear on the screen. ● Press the qr buttons or turn the Ê dial to choose an effect level, then press the l button. X You can check the effect on the screen. Shoot. Shoot with the Effects of a Fish-Eye Lens (Fish-eye Effect) Since you may not achieve the expected results depending on the shooting conditions, try taking some test shots first.

..

Take Shots That Look Like a Miniature - Page 72

72 Blurs chosen portions in the top and bottom of an image to produce the effect of a miniature model. Choose . ● Follow Steps 1 – 2 on p. 61 to choose . X A white frame (the area that will not be blurred) appears on the screen. Choose the area to keep in focus. ● Press the l button. ● Move the zoom lever to change the frame size, and press the op buttons to change the frame position. ● Pressing the l button restores the shooting screen. Shoot. Take Shots That Look Like a Miniature Model (Miniature Effect) • If you press the m button in Step 2, the horizontal/vertical orientatio..

Choosing Settings Yourself - Page 73

73 Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. • This chapter assumes that you have set the mode dial to G . • G stands for Program AE. • Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 182 – 185) . 4

..

Adjusting the Brightness (Exposure Compensation) - Page 74

74 You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. Enter G mode. ● Set the mode dial to G . Adjust the settings according to your purposes (pp. 75 – 86) . Shoot. You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of -2 to +2. Adjust the brightness. ● While watching the screen, turn the Ê dial to adjust the brightness. X The exposure compensation amount will appear on the screen. Shooting in Program AE What if the shutter speed and aperture value appear in orange? If a correct exposure can..

How can I take better close-ups? - Page 75

75 You can make the flash fire every time you shoot. The effective flash range is approximately 50 cm – 6.5 m (1.6 – 21 ft.) at maximum wide angle ( j ), and approximately 90 cm – 3.0 m (3.0 – 9.8 ft.) at maximum telephoto ( i ). Choose h . ● After pressing the r button, press the qr buttons or turn the Ê dial to choose h , then press the m button. X If the flash has been lowered, the flash will rise automatically. X Once set, h will appear on the screen. When it is difficult to focus because your shot contains subjects that are near, you can change the focusing range to focus mo..

76 - Page 76

76 You can choose from four recording pixel (image size) settings. Choose the recording pixel setting. ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The setting will appear on the screen. You can choose from the following two compression ratios (image quality): (Fine), (Normal). Choose the compression ratio setting. ● After pressing the m button, press the op buttons to choose , then press the l button. Choose an option. ● Press the qr buttons or turn the Ê..

Approximate Values for Recording Pixels and Compression - Page 77

Changing the Compression Ratio (Image Quality) 77 Approximate Values for Recording Pixels and Compression Ratio (4:3 Aspect Ratio) • The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings. • The values in the table are based on a 4:3 aspect ratio. If the aspect ratio is changed (p. 79) , more images can be shot because the data size per image will be smaller than with 4:3 images. However, since 16:9 images have a setting of 1920 x 1080 pixels, their data size will be larger than 4:3 images. Approximate V..

How do you erase images shot with - Page 78

78 A RAW image is raw data recorded with nearly no deterioration in image quality resulting from image processing inside the camera. You can use the supplied software to adjust the image in any way you like with minimal loss in image quality. Choose . ● After pressing the m button, press the op buttons to choose . Choose a menu option. ● Press the qr buttons or turn the Ê dial to choose or , then press the m button. Shooting RAW Images Records a JPEG image. When JPEG images are recorded, the images are processed inside the camera for optimum image quality and compressed. However, the c..

Changing the Aspect Ratio - Page 79

79 You can change the width to height ratio of an image. Choose . ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose a option, then press the m button. Changing the Aspect Ratio Same aspect ratio as wide screen high definition televisions. Same aspect ratio as 35mm film. Suitable for printing out 5" x 7" or postcard sized images. Same aspect ratio as the screen of this camera. Suitable for printing out 3.5" x 5" sized images. Square-shaped aspect ratio. An aspect ratio well suited for portraits. • The ..

Changing the ISO Speed - Page 80

80 Choose the ISO speed. ● Turn the Ï ring to choose an ISO speed. X The setting will appear on the screen. Changing the ISO Speed Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. Low High Fine weather conditions, outdoor shooting. Cloudy, twilight Nightscapes, dark interiors Changing the ISO speed • Lowering the ISO speed results in sharper images, but there may be an increased chance of subject or image blurring in certain shooting conditions. • Raising the ISO speed results in a faster shutter speed, reducing image blurring and letting the flash re..

Changing the Maximum ISO Speed for - Page 81

Shooting Using a TV Monitor 81 Changing the Maximum ISO Speed for You can set a maximum ISO speed of – for . Choose [ISO Auto Settings]. ● Press the n button to choose [ISO Auto Settings] in the 4 tab, then press the m button. Choose the maximum ISO speed. ● Press the op buttons or turn the Ê dial to choose [Max ISO Speed], then press the qr buttons to choose a setting. Changing the Rate of Change for You can choose [Fast], [Slow] or [Standard] rates of change for . Choose the rate of change. ● Follow Steps 1 – 2 above to choose [Rate of Change]. ● Press the qr buttons to choos..

Choose the white balance function. - Page 82

82 The white balance (WB) function sets the optimal white balance for natural looking colors to match the shooting conditions. Choose the white balance function. ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The setting will appear on the screen. Custom White Balance You can adjust the white balance to the light source at the shooting location. Make sure that you set the white balance under the light source of the actual scene you will shoot. ● In Step 2 above..

Correcting the White Balance - Page 83

Adjusting the White Balance 83 Correcting the White Balance You can correct the white balance. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Correct the White Balance. ● In Step 1 on p. 82 , choose and turn the Ï ring to adjust the level of correction for B and A. X The icon will appear on the screen. ● For even more specific adjustments, press the l button. X The selection screen appears. ● Turn the Ï ring and Ê dial or press the opqr buttons to adjust the level of correction. ● To re..

Choose a Drive mode. - Page 84

84 As long as you hold the shutter button down, the camera will shoot continuously. Choose a Drive mode. ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose W or , then press the m button. Shoot. X As long as you hold the shutter button down, the camera will shoot successive images. * When in t (p. 63) , AF lock (p. 90) or manual focus modes (p. 93) , will change to . Continuous Shooting Mode Maximum Speed (Approx. images/sec.) Description W Continuous 1.9 The camera shoots continuously with the focus and..

Changing the Tone of an Image (My Colors) - Page 85

85 You can change the tone of an image to sepia or black and white when shooting. Choose My Colors. ● After pressing the m button, press the op buttons to choose Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The setting will appear on the screen. Changing the Tone of an Image (My Colors) My Colors Off — Vivid Emphasizes the contrast and color saturation for a vivid impression. Neutral Tones down the contrast and color saturation for neutral hues. Sepia Sepia tones. B/W Black and white. Positive Film Combines the effects of..

Changing the Composition with the Focus Lock - Page 86

Changing the Composition with the Focus Lock 86 Custom Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. ● Follow Step 2 on p. 85 to choose , then press the l button. ● Press the op buttons to choose an option, then press the qr buttons or turn the Ê dial to choose a value. ● The more to the right, the stronger/darker (skin tone) the effect gets, the more to the left, the weaker/lighter (skin tone) the effect gets. ● Press the l button to complete the setting. While you keep the shutter button ..

Getting More Out of Your - Page 87

87 Getting More Out of Your Camera This chapter serves as the advanced version of Chapter 4 and explains how to take pictures using various functions. • This chapter assumes that you have set the mode dial to G . • The sections “Setting the Shutter Speed” (p. 98) , “Setting the Aperture Value” (p. 99) , “Setting the Shutter Speed and Aperture Value” (p. 100) , assume that you have set the mode dial to the corresponding mode. • The section “Adjusting the Flash Output” (p. 107) assumes that you have set the mode dial to D . • The sections “Changing the Color and Shoo..

You can reduce the AF frame size - Page 88

88 You can change the AF (Auto Focus) frame mode to match the scene you want to shoot. Choose [AF Frame]. ● After pressing the n button, choose [AF Frame] in the 4 tab, then press the qr buttons to choose an option. Center The AF frame is locked to the center. This is effective for focusing on a specific point. Face AiAF • Detects people’s faces and sets the focus, exposure (evaluative metering only) and white balance ( only). • When the camera is pointed at subjects, a white frame appears on the face the camera judges to be the main subject, and gray frames (max. 2) will appear on ..

Choosing the Subject to Focus On (Tracking AF) - Page 89

Choosing the Subject to Focus On (Tracking AF) 89 Tracking AF You can choose the subject you want to focus on and shoot. You can choose the subject you want to focus on and shoot. Choose [Tracking AF]. ● Press the n button to choose [AF Frame] in the 4 tab, then press the qr buttons to choose [Tracking AF]. X will appear in the center of the screen. Choose the subject to focus on. ● Point the camera so that is on the subject you want to focus on and press the q button. X The camera will beep and will appear when a subject is detected. The camera will continue to track the subject within..

Shooting with the AF Lock - Page 90

Shooting with the AF Lock 90 Shoot. ● Press the shutter button halfway. will change into a blue which will follow the subject while the camera continues to adjust the focus and exposure. ● Press the shutter button fully to shoot. X Even after shooting completes, will appear, and the camera will continue to track the subject. The focus can be locked. After locking the focus, the focal distance will not change even when you release your finger from the shutter button. Lock the focus. ● Keep the shutter button pressed halfway and press the q button. X The focus locks, and and the MF indi..

What if the display does not magnify? - Page 91

91 If you press the shutter button halfway, the AF frame will magnify and you can check the focus. Choose [AF-Point Zoom]. ● Press the n button to choose [AF- Point Zoom] in the 4 tab, then press the qr buttons to choose [On]. Check the focus. ● Press the shutter button halfway. X In [Face AiAF] (p. 88) , the face detected as the main subject will appear magnified. X In [Center] (p. 88) , the contents of the center AF frame will appear magnified. Magnifying the Focal Point What if the display does not magnify? The display will not appear magnified in [Face AiAF] if a face cannot be dete..

Choosing the Person to Focus On (Face Select) - Page 92

92 You can choose a specific person’s face to focus on and then shoot. Register 0 to the button (p. 166) . Enter Face Select mode. ● Point the camera toward the face of the subject and press the button. X After [Face Select : On] appears, a face frame will appear around the face detected as the main subject. ● Even if the subject moves, the face frame will follow the subject within a certain range. ● If a face is not detected, will not appear. Choose the face to focus on. ● If you press the 0 button, the face frame will move to another face detected by the camera. ● When the fra..

Shooting in Manual Focus Mode - Page 93

93 You can use manual focus when auto focus is not possible. If you press the shutter button halfway after roughly focusing manually, you can fine tune the focus. Choose ● After pressing the q button, press the qr buttons or turn the Ê dial to choose , then press the m button. X and the MF indicator appear. Focusing roughly. ● The side bar shows your focal point and an MF distance indicator. While looking at the magnified area, turn the Ê dial to find an approximate focus. Fine tuning the focus. ● If you press the shutter button halfway, you can fine tune the focus (Safety MF). Shoo..

Focus Bracketing (Focus-BKT Mode) - Page 94

94 The camera automatically takes three continuous shots in the following order: one at the position set in manual focus, and one each with focus positions preset farther and nearer. The focus adjustment can be set in 3 levels. Choose . ● After pressing the m button, press the op buttons to choose , then press the qr buttons or turn the Ê dial to choose . Set the focus. ● Press the l button. ● Press the qr buttons or turn the Ê dial to make the setting. While the shutter button is pressed halfway, the focus and exposure will continue to adjust, allowing you to take pictures of movin..

Changing the Metering Method - Page 95

Changing the Metering Method 95 Focus. ● The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. You can change the metering method (brightness measuring function) to match the shooting conditions. Choose the metering method. ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The setting will appear on the screen. • The camera may not be able to focus in some conditions. • In low light conditions, AF..

If you lock the exposure and turn the - Page 96

96 You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for “Auto Exposure”. Lock the exposure. ● Point the camera toward the subject and press the o button while pressing the shutter button halfway. X When appears, the exposure will be locked. ● If you release your finger from the shutter button and press the o button again, will disappear and AE will unlock. Compose the scene and shoot. Just as with the AE lock, you can lock the exposure for shooting with the flash. FE stands for “Flash Exposure”. Choose h (p. 75) . Lock the flash e..

Auto Exposure Bracketing (AEB Mode) - Page 97

97 The camera takes 3 continuous shots while automatically adjusting the exposure to standard exposure, underexposure and overexposure, in that order. Choose . ● After pressing the m button, press the op buttons to choose , then press the qr buttons or turn the Ê dial to choose . Set the exposure compensation amount. ● Press the l button. ● Press the qr buttons or turn the Ê dial to adjust the setting. ● From the exposure set by the camera, you can adjust the amount of compensation ±2 stops in 1/3-stop increments. If exposure compensation (p. 74) is already being used, settings a..

What if the aperture value appears in orange? - Page 98

98 You can set the shutter to the speed at which you want to shoot. The camera will set the appropriate aperture value for the shutter speed you set. M stands for “Time value”. Set the mode dial to M . Make the setting. ● Turn the Ï ring to set the shutter speed. Shoot. Available Shutter Speeds • 2" indicates 2 seconds, 0"3 indicates 0.3 second and 1/160 indicates 1/160 second. Setting the Shutter Speed 15", 13", 10", 8", 6", 5", 4", 3"2, 2"5, 2", 1"6, 1"3, 1", 0"8, 0"6, 0"5, 0"4, 0"3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/1..

What if the shutter speed appears in orange? - Page 99

99 You can set the aperture to a value at which you want to shoot. The camera will set the appropriate shutter speed for the aperture value you set. B stands for “Aperture value”, which refers to the size of the aperture opening inside the lens. Set the mode dial to B . Make the setting. ● Turn the Ï ring to set the aperture value. Shoot. Available Aperture Values • Depending on the zoom position, some aperture values may not be available. Setting the Aperture Value F2.0, F2.2, F2.5, F2.8, F3.2, F3.5, F4.0, F4.5, F4.9, F5.0, F5.6, F6.3, F7.1, F8.0 What if the shutter speed appears ..

Setting the Shutter Speed and Aperture Value - Page 100

100 You can manually set the shutter speed and aperture to shoot images. D stands for “Manual”. Set the mode dial to D . Make the setting. ● Turn the Ê dial to set the shutter speed, or turn the Ï ring to set the aperture value. X The set exposure level appears on the indicator. You can check the difference against the standard exposure level. X When the difference is more than ±2 stops, the set exposure level appears in orange. When you press the shutter button halfway, “-2” or “+2” appears in orange. Setting the Shutter Speed and Aperture Value Shutter Speed Aperture Valu..

Making Settings using the Control Ring - Page 101

101 You can change the function assigned to the control ring. By performing operations with the control ring, you can enjoy the feeling of using a fully manual camera. Assign a function to the Ï ring. ● Press the ring function selector button. ● Press the ring function selector button, the qr buttons, or turn the Ï ring or Ê dial to choose an option. ● Press the m button to make the setting. Adjust the settings. ● Turn the Ï ring or the Ê dial to adjust the settings of the assigned functions. ● You can switch between the two functions assigned to the Ê dial (p. 102) , such a..

Functions Assignable to the Control Ring - Page 102

Making Settings using the Control Ring 102 Functions Assignable to the Control Ring The functions you can assign to the control ring are different depending on the shooting mode. The functions assigned to the control dial also change. • Av: aperture value (p. 99) , Tv: shutter speed (p. 98) , ISO: ISO speed (p. 80) , +/-: exposure compensation (p. 74) , MF: manual focus (p. 93) . • With , , @ and , the functions assignable to the Ê dial are the same as with ISO. Shooting mode D B M G Assignable Function Ï Av Av Tv ISO Ê Tv +/- +/- +/- Ï ISO ISO ISO ISO Ê Av, Tv Av, +/- Tv, +/- +/- ..

Registering Functions to the Control Ring - Page 103

Making Settings using the Control Ring 103 Registering Functions to the Control Ring You can register which functions will be assigned to the control ring for each Shooting mode. Choose ● Follow Step 1 on p. 101 to choose , then press the n button. Make the setting. ● Press the qr buttons or turn the Ê dial to choose a Shooting mode to set. ● Press the op buttons or turn the Ï ring to choose a function to register to the control ring. X The function assigned to the control dial will be changed. ● Press the m button to make the setting.

..

Dynamic Range Correction (DR Correction) - Page 104

104 The camera can detect areas in the scene, such as faces or backgrounds, that are too bright or dark and automatically adjust them to the optimum brightness when shooting. To suppress highlight blowout, Dynamic Range Correction is used. To bring out shadow details, Shadow Correct is used. Dynamic Range Correction (DR Correction) You can choose from the following Dynamic Range Correction methods: , and . Choose . ● After pressing the m button, press the op buttons to choose . Make the setting. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X O..

Red-Eye Correction - Page 105

Red-Eye Correction 105 Shadow Correct Choose . ● Follow Step 1 on p. 104 to choose , then press the l button. ● Press the qr buttons or turn the Ê dial to choose , then press the m button. X Once set, @ will appear on the screen. You can automatically correct red-eye that occurs in images taken with the flash. Choose [Flash Settings]. ● Press the n button to choose [Flash Settings] in the 4 tab, then press the m button. Adjust the setting. ● Press the op buttons or turn the Ê dial to choose [Red-Eye Corr.], then press the qr buttons to choose [On]. X Once set, Œ will appear on th..

Adjusting the Flash Exposure Compensation - Page 106

106 You can make the main subject, such as people, appear bright by having the camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach. Choose … . ● After pressing the r button, press the qr buttons or turn the Ê dial to choose … , then press the m button. X Once set, … will appear on the screen. Shoot. ● Even if the flash fires, ensure that the subject does not move until the shutter sound ends. Just like with Exposure Compensation (p. 74) , you can adjust..

Adjusting the Flash Output - Page 107

Adjusting the Flash Output 107 In D mode, you can choose 3 levels of flash output. Set the mode dial to D . Choose the level of flash output. ● After pressing the r button, immediately turn the Ï ring and select the level of output, then press the m button. X Once set, ~ will appear on the screen. • You can also set the flash exposure compensation. Press the n button and choose [Flash Settings] in the 4 tab. Then choose [Flash Exp. Comp] and press the qr buttons to choose a setting. • If you press the r button and immediately press the n button, the setting screen will appear. Adjust..

Registering Shooting Settings - Page 108

108 You can register commonly used shooting modes and settings to your preference. To switch between registered settings, simply turn the mode dial to . Even if you switch shooting modes or turn off the power, settings that usually cancel (self timer, etc.) will be saved. Settings that Can be Registered • Shooting modes ( G , M , B and D ) • Items set in G , M , B or D (pp. 74 – 100) • Items in the shooting menu • Zoom position • Manual focus position (p. 93) • My Menu items (p. 167) Enter the shooting mode you want to register and make the settings. Choose [Save Settings]. ..

Changing the Color and Shooting - Page 109

109 You can change the look of an image when shooting. However, depending on shooting conditions the image may become coarse, or the colors may not come out as expected. Color Accent You can choose to retain a single color and change the rest to black and white in a composition. Choose T . ● Follow Steps 1 – 2 on p. 61 to choose T . Press the l button. X The unchanged image and the Color Swap image will alternately display. ● The color for default settings is green. Specify the color. ● Position the center frame so it is filled with the color you want and press the q button. X The s..

Changing the Color and Shooting - Page 110

Changing the Color and Shooting 110 Color Swap You can swap one color in an image for another when recording it. You can only swap one color. Choose Y . ● Follow Steps 1 – 2 on p. 61 to choose Y . Press the l button. X The unchanged image and the Color Swap image will alternately display. ● The default setting is to change green to gray. Specify the color to be swapped. ● Position the center frame so it is filled with the color you want and press the q button. X The specified color will be recorded. Specify the target color. ● Position the center frame so it is filled with the col..

Checking for Shut Eyes - Page 111

Checking for Shut Eyes 111 Specify the range of colors to be swapped. ● Press the op buttons or turn the Ê dial to adjust the range of colors to be changed. ● Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. ● Press the l button to restore the shooting screen. When the camera detects the possibility that people have their eyes shut, appears. Choose [Blink Detection]. ● Press the n button, then choose [Blink Detection] in the 4 tab. Press the qr buttons to choose [On]. Shoot. X When a person with shut eyes..

Shooting Stitch Assist Images - Page 112

112 Large subjects can be split into several shots that can later be merged together using the included software on a computer to create a panoramic image. Choose x or v . ● Follow Steps 1 – 2 on p. 61 to choose x or v . Take the first shot. X The exposure and white balance will be set with the first shot. Take subsequent shots. ● Overlap part of the first shot when taking the second shot. ● Minor discrepancies in the overlapping portions will be corrected when the images are merged. ● Up to 26 shots can be recorded with the same procedures. Finish shooting. ● Press the m button..

Using Various Functions for - Page 113

113 Using Various Functions for Shooting Movies This chapter serves as a more advanced version of the “Shooting Movies” and “Viewing Movies” sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. • This chapter assumes that the mode dial has been set to E mode. • The latter half of the chapter explaining movie playback and editing assumes that the 1 button has been pressed to enter Playback mode. 6

..

Changing the Movie Mode - Page 114

114 You can choose between four Movie modes. Choose a Movie mode. ● After pressing the m button, press the op buttons or turn the Ê dial to choose E . ● Press the qr buttons or turn the Ê dial to choose a mode, then press the m button. You can shoot movies that look like moving miniature models. You create the miniature model effect by choosing the upper and lower portions of the scene that will be blurred and the playback speed, which makes people and objects in the scene move quickly during playback. Audio will not be recorded. Choose . ● Follow the steps above to choose . X A whi..

12 sec. - Page 115

Shoot Movies That Look Like a Miniature Model (Miniature Effect) 115 Choose the area to keep in focus. ● Press the l button. ● Move the zoom lever to change the frame size, and press the op buttons to change the frame position. Choose a playback speed. ● Press the n button. ● Press the qr buttons or turn the Ê dial to choose a playback speed. ● Press the n button restore the shooting screen. Shoot. Playback Speeds and Estimated Playback Times (for 1 Min. Clips) Speed Playback Time 12 sec. 6 sec. 3 sec. • If you press the m button in Step 2, the horizontal/vertical orientation o..

Changing the Image Quality - Page 116

116 You can choose between three image quality settings. Choose the image quality setting. ● After pressing the m button, press the op buttons to choose . Choose an option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The option you set will appear on the screen. Image Quality Table * movies play back at 30 fps. Estimated Shooting Time Changing the Image Quality Image Quality (Recording Pixels/Frame Rate) Content 1280 x 720 pixels, 24 frames/sec.* For shooting high-definition movies. 640 x 480 pixels, 30 frames/sec. For shooting standard qua..

AE Lock/Exposure Shift - Page 117

117 You can lock the exposure or change it in 1/3 steps within a range of ±2 before shooting. Focus. ● Press the shutter button halfway to focus. Lock the exposure. ● After releasing the shutter button, press the o button to lock the exposure. The exposure shift bar appears. ● Press the o button again to release the lock. Change the exposure. ● While watching the screen, turn the Ê dial to adjust the exposure. Shoot. Wind Filter suppresses noise when the wind is strong. However, unnatural sound may result when used to record in locations with no wind. ● Press the n button to cho..

Other Shooting Functions - Page 118

118 The following functions can be used in the same way as for still images. Functions marked with a * can be used in the same way as for still images when in , > or z . • Zooming in More Closely on Subjects - The optical zoom is not available while shooting. - The sound of zoom operations will be recorded. - The digital zoom (p. 55) is available in E . - The digital zoom is not available in , > , or z . Be sure to set the optical zoom before shooting. • Shoot Using Preset Focal Lengths (Step Zoom) (p. 57) • Using the Self-Timer (p. 59) * The number of shots cannot be changed. ..

Summary of Movie Control Panel in “Viewing Movies” - Page 119

Editing 119 Summary of Movie Control Panel in “Viewing Movies” (p. 31) You can trim the beginnings and ends of recorded movies. Choose * . ● Follow Steps 1 – 3 on p. 31 to choose * , then press the m button. X The movie editing panel and the movie editing bar will appear. Set the editing range. ● Press the op buttons and choose or . ● Press the qr buttons or turn the Ê dial to move . will display at a point where you can edit the movie. If you choose , you can trim the beginning of the movie from . If you choose , you can trim the end of the movie from . Exit Playback Slow moti..

Check the edited movie. - Page 120

Editing 120 X Even if you move to a point other than a , only the portion from the nearest to the left will be trimmed when is chosen. Only the portion from the nearest to the right will be trimmed when is chosen. X The section indicated with will be the section of the movie that remains after editing. Check the edited movie. ● Press the op buttons to choose (Play), then press the m button. The edited movie will play. ● To edit the movie again, repeat Step 2. ● To cancel editing, press the op buttons, and choose . After pressing the m button, press the qr buttons or turn the Ê dial t..

Using Various Playback and - Page 121

121 Using Various Playback and Editing Functions This chapter explains various ways to play back and edit images. • Press the 1 button to enter Playback mode before operating the camera. • It may not be possible to play back or edit images that have been edited on a computer, had their file name changed, or have been taken on a different camera. • The edit function (pp. 142 – 146) cannot be used if the memory card does not have free space available. 7

..

An orange frame appears on the chosen image. - Page 122

122 Searching Images Using Index Display Displaying multiple images at the same time lets you quickly find the image you want. Move the zoom lever toward g . X Images will display in an index. ● The number of images increases each time you move the lever toward g . ● The number of images decreases each time you move the lever toward k . Choose an image. ● Turn the Ê dial to switch images. ● Press the opqr buttons to choose an image. X An orange frame appears on the chosen image. ● Press the m button to display the chosen image by itself. Searching Images Using the Control Dial Tu..

Viewing Images in Filtered Playback - Page 123

123 When there are many images on the memory card, you can filter and display them by a specified filter. You can also protect (p. 132) or delete (p. 136) all images at once while filtered. Search by , , and Choose a target filter. ● In single image playback (excluding detailed information display), press the o button, then press the op buttons to choose a jump method. ● In , or , press the qr buttons to choose a filter. Turning the Ê dial will only display images that match the filter of the chosen target image. ● Press the l button to switch between Information Display and No Infor..

What if you can’t choose a filter? - Page 124

Viewing Images in Filtered Playback 124 Jump by and Images ● In single image playback, press the o button, then press the op buttons to choose a jump method. ● If you press the qr buttons, the display will advance to the image that is the chosen number of images away. ● Pressing the n button restores single image playback. Using the Control Ring to Jump Turn the control ring to jump images using the , , and functions. ● In single image playback, turn the Ï ring, then press the op buttons to choose a jump method. ● If you turn the Ï ring, the display will advance to the image tha..

Choose [Slideshow]. - Page 125

125 You can automatically play back images recorded to a memory card. Choose [Slideshow]. ● Press the n button to choose [Slideshow] from the 1 tab, then press the m button. Make the setting. ● Press the op buttons or turn the Ê dial to choose an item, then press the qr buttons to adjust the setting. Choose [Start]. ● Press the op buttons or turn the Ê dial to choose [Start], then press the m button. X The slideshow will start a few seconds after [Loading image...] displays. ● You can pause/restart a slideshow by pressing the m button again. ● Press the n button to stop the slid..

Checking the Focus - Page 126

Checking the Focus 126 You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus. Press the l button to switch to the focus check display (p. 44) . X A white frame will appear where the AF frame or face was when the focus was set. X A gray frame will appear on a face detected during playback. X The area within the orange frame appears magnified. Switch frames. ● Move the zoom lever toward k once. X The screen shown to the left will appear. ● Press the m button to move to a different frame when multiple frames a..

Displaying Various Images (Smart Shuffle) - Page 127

127 Move the zoom lever toward k . ● The display will zoom in on the image. If you continue to hold the zoom lever, it will zoom in up to a maximum factor of 10x. ● If you press the opqr buttons, you can move the location of the displayed area. ● Move the zoom lever toward g to zoom out, or continue to hold it to return to single image playback. ● If you turn the Ê dial, you can switch images while zoomed. The camera will choose four images based on the displayed image. If you choose one of those images, the camera will choose four more images letting you enjoy the playing back of ..

Changing Image Transitions - Page 128

Changing Image Transitions 128 Choose an image. ● Press the opqr buttons to choose the image you want to view next. X The chosen image will be displayed in the middle, and the next four possibilities will appear. ● Pressing the m button will display the middle image at full size. Press the m button again to restore the original display. You can also use the zoom lever. ● Pressing the n button restores single image playback. You can choose from three transition effects when switching between images in single image playback. Choose [Transition]. ● Press the n button to choose [Transit..

What if the images don’t display correctly on the TV? - Page 129

129 Using the supplied Stereo AV cable (p. 2) , you can connect the camera to a TV to view images you have shot. Turn off the camera and TV. Connect the camera to the TV. ● Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. ● Insert the cable plug fully into the video input terminals as shown in the illustration. Turn on the TV and switch it to the input the cable is connected to. Turn on the camera. ● Press the 1 button to turn on the camera. X The image will appear on the TV (nothing will appear on the screen of the camera). ● After yo..

Using a TV Remote to Control the Camera - Page 130

130 Use the separately sold HDMI Cable HTC-100 to connect the camera to a high-definition TV for an enhanced viewing experience. Turn off the camera and TV. Connect the camera to the TV. ● Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. ● Fully insert the cable plug into the TV’s HDMI terminal. Display images. ● Follow Steps 3 and 4 on p. 129 to display the images. Using a TV Remote to Control the Camera When you connect the camera to an HDMI CEC compatible TV, you can use the TV's remote control to operate the camera and play back im..

Viewing Images on a High-Definition TV - Page 131

Viewing Images on a High-Definition TV 131 Connect the camera to the TV. ● Follow Steps 1 – 2 on p. 130 to connect the camera to the TV. Display images. ● Turn on the TV and press the camera's 1 button. X The image will appear on the TV (nothing will appear on the screen of the camera). Use the TV's remote control. ● Press the remote control's qr buttons to choose an image. ● Press the OK/Select button to display the camera control panel. Press the qr buttons to choose an item, then press the OK/Select button again. Summary of the Camera Control Panel Displayed on the TV Return Cl..

Choose a selection method - Page 132

132 You can protect important images so that they cannot be accidentally erased with the camera (pp. 28 , 136) . Choose a selection method Choose [Protect]. ● Press the n button to choose [Protect] in the 1 tab, then press the m button. Choose a selection method. ● Press the op buttons or turn the Ê dial to choose a selection method, then press the m button. ● Pressing the n button will restore the menu screen. Choosing Images Individually Choose [Select]. ● Follow Step 2 above to choose [Select], then press the m button. Protecting Images If you format the memory card (pp. 22 , 51..

Protecting Images - Page 133

Protecting Images 133 Choose images. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. X will appear on the screen. ● Pressing the m button again deselects the image and will disappear. ● To choose additional images, repeat the above procedure. Protect the image. ● If you press the n button, a confirmation screen will appear. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. Select Range Choose [Select Range]. ● Follow Step 2 on p. 132 to choose [Select Range], then press the m button. Choose a starting imag..

Choose an ending image. - Page 134

Protecting Images 134 ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. Choose an ending image. ● Press the r button to choose [Last image], then press the m button. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. ● You cannot choose images before the first image. Protect images. ● Press the p button to choose [Protect], then press the m button. Choose images with the Ê dial You can also choose the first or last image by turning the Ê dial when the upper screen in Steps 2 and 3 is displayed.

..

Choose [All Images]. - Page 135

Protecting Images 135 Choose All Images Choose [All Images]. ● Follow Step 2 on p. 132 to choose [All Images], then press the m button. Protect images. ● Press the op buttons or turn the Ê dial to choose [Protect], then press the m button. You can unlock groups of protected images if you choose [Unlock] in Step 4, while in [Select Range] or Step 2 while in [All Images].

..

Choose a selection method - Page 136

136 You can choose images and then erase them in groups. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 132) cannot be erased. Choose a selection method Choose [Erase]. ● Press the n button to choose [Erase] in the 1 tab, then press the m button. Choose a selection method. ● Press the op buttons or turn the Ê dial to choose a selection method, then press the m button. ● Pressing the n button will restore the menu screen. Choosing Images Individually Choose [Select]. ● Follow Step 2 above to choose [Select] and press the m but..

Erasing Images - Page 137

Erasing Images 137 Erase. ● If you press the n button, a confirmation screen will appear. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. Select Range Choose [Select Range]. ● Follow Step 2 on p. 136 to choose [Select Range], then press the m button. Choose images. ● Follow Steps 2 and 3 on p. 133 to choose images. Erase. ● Press the p button to choose [Erase], then press the m button. Choose All Images Choose [All Images]. ● Follow Step 2 on p. 136 to choose [All Images], then press the m button. Erase. ● Press the qr buttons or turn the Ê..

Tagging Images as Favorites - Page 138

138 When you tag images as favorites, you can easily categorize just those images. You can also filter out just those images for viewing, protecting or erasing (p. 123) . Choose [Favorites]. ● Press the n button to choose [Favorites] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. X will appear on the screen. ● Pressing the m button again untags the image and disappears. ● To choose additional images, repeat the above procedure. Make the setting. ● If you press the n button, a confirmat..

Organizing Images by Category - Page 139

139 You can organize images into categories. You can display the images in a category in Filtered Playback (p. 123) and process all images at once by using the functions below. • “Viewing Slideshows” (p. 125) , “Protecting Images” (p. 132) , “Erasing Images” (p. 136) , “Choosing Images for Printing (DPOF)” (p. 151) Choose a selection method Choose [My Category]. ● Press the n button to choose [My Category] in the 1 tab, then press the m button. Choose a selection method. ● Press the op buttons or turn the Ê dial to choose a selection method, then press the m button. ..

Organizing Images by Category (My Category) - Page 140

Organizing Images by Category (My Category) 140 Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image. Choose a category. ● Press the op buttons to choose a category, then press the m button. X will appear on the screen. ● Pressing the m button again deselects the image and will disappear. ● To choose additional images, repeat the above procedure. Make the setting. ● If you press the n button, a confirmation screen will appear. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. Select Range Choose [Select Range]. ● Foll..

Rotating Images - Page 141

Rotating Images 141 Choose a category. ● Press the p button to choose an item, then press the qr buttons or turn the Ê dial to choose a category. Choose the setting. ● Press the p button to choose [Select], then press the m button. You can change the orientation of an image and save it. Choose [Rotate]. ● Press the n button to choose [Rotate] in the 1 tab, then press the m button. Rotate the image. ● Press the qr buttons or turn the Ê dial to choose an image. X The image will rotate 90° with each press of the m button. ● Pressing the n button will restore the menu screen. If yo..

Resizing Images - Page 142

142 You can resize images to a lower pixel setting and save the resized image as a separate file. Choose [Resize]. ● Press the n button to choose [Resize] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. Choose an image size. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. X The [Save new image?] screen will appear. Save the new image. ● Press the qr buttons or turn the Ê dial to choose [OK] and press the m button. X The image will be saved as a ne..

Trimming - Page 143

143 You can cut out a portion of a recorded image and save it as a new image file. Choose [Trimming]. ● Press the n button to choose [Trimming] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. Adjust the trimming area. X A frame will appear around the portion of the image to be trimmed. X The original image will display in the upper left and the trimmed image will display in the lower right. ● If you move the zoom lever to the left or right, you can change the frame size. ● If you press th..

Adding Effects with the My Colors Function - Page 144

144 You can change the color of an image and save it as a separate image. Refer to p. 85 for details on each menu item. Choose [My Colors]. ● Press the n button to choose [My Colors] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. Choose a menu option. ● Press the qr buttons or turn the Ê dial to choose an option, then press the m button. Save as a new image and display. ● Follow Steps 4 and 5 on p. 142 . Adding Effects with the My Colors Function If you repeatedly change the color of th..

Correcting the Brightness (i-Contrast) - Page 145

145 The camera can detect areas in an image, such as faces or backgrounds, that are too dark and automatically adjust them to the optimum brightness. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression. You can choose from four levels of correction, and save the image as a new file. Choose [i-Contrast]. ● Press the n button to choose [i-Contrast] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. Choose a menu item. ● Pr..

Correcting the Red-Eye Effect - Page 146

146 You can automatically correct red eyes in images and save them as new files. Choose [Red-Eye Correction]. ● Press the n button to choose [Red- Eye Correction] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image. Correct the image. ● Press the m button. X Red-eye detected by the camera will be corrected and a frame will appear around the corrected portion. ● You can magnify or reduce the size of the image using the procedures in “Magnifying Images” (p. 127) . Save as a new image and display. ● Press the opqr ..

Canon-Brand PictBridge Compliant Printers - Page 147

147 Printing This chapter explains how to choose images for printing, and print using a Canon-brand PictBridge compliant printer (sold separately) (p. 40) . Please also refer to the Personal Printing Guide . Canon-Brand PictBridge Compliant Printers 8

..

Printing Images - Page 148

148 You can easily print the pictures you take by connecting the camera to a PictBridge compliant printer (sold separately) using the supplied interface cable (p. 2) . Turn off the camera and printer. Connect the camera to the printer. ● Open the cover and insert the small plug of the included interface cable (p. 2) firmly into the camera terminal in the direction shown. ● Insert the interface cable’s larger plug into the printer. For connection details, refer to the user guide provided with the printer. Turn on the printer. Turn on the camera. ● Press the 1 button to turn on the ca..

Choose an image to print. - Page 149

Printing Images 149 Choose an image to print. ● Press the qr buttons or turn the Ê dial to choose an image. Print images. ● Press the c button. X Printing will start. ● If you want to print additional images, repeat Steps 5 and 6 after printing has completed. ● After printing has completed, turn off the camera and printer, and unplug the interface cable. • Refer to the Personal Printing Guide for details on printing. • Refer to p. 40 for Canon-brand PictBridge compliant printers. • Index printing (p. 151) is not available on certain Canon-brand PictBridge compliant printers (..

Printing from the Print List (DPOF) - Page 150

150 You can add images to the print list (DPOF) directly after shooting or during playback by pressing the c button. These selection methods comply with the DPOF (Digital Print Order Format) standards. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image. Press the 2 button (RAW images and movies will be excluded). Add images to the print list. ● Press the op buttons to choose the number of prints, then press the qr buttons or turn the Ê dial to choose [Add] and press the m button. ● To cancel adding images, repeat Steps 1 and 2, and press the qr buttons or ..

Choosing Images for Printing (DPOF) - Page 151

151 You can choose up to 998 images on a memory card for printing and specify settings such as the number of copies so that they can be printed together (p. 154) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. Print Settings You can set the print type, date and file number. These settings apply to all images chosen for printing. Choose [Print Settings]. ● Press the n button to choose [Print Settings] in the 2 tab, then press the m button. Adjust the settings. ● Press the op buttons or turn the Ê dial to cho..

Choosing Images for Printing (DPOF) - Page 152

Choosing Images for Printing (DPOF) 152 Choosing the Number of Copies Choose [Select Images & Qty.]. ● Press the n button to choose [Select Images & Qty.] in the 2 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the Ê dial to choose an image, then press the m button. X You will be able to set the number of print copies. ● If you choose images in [Index], appears on the screen. Pressing the m button again will deselect the image and will disappear. Set the number of prints. ● Press the op buttons or turn the Ê dial to set the number of prints (..

Choosing Images for Printing (DPOF) - Page 153

Choosing Images for Printing (DPOF) 153 Select Range Choose [Select Range]. ● In Step 1 on p. 152 , choose [Select Range], then press the m button. ● Follow Steps 2 and 3 on p. 133 to choose images. Make print settings. ● Press the op buttons to choose [Order], then press the m button. Set All Images to Print Once Choose [Select All Images]. ● In Step 1 on p. 152 , choose [Select All Images], then press the m button. Make print settings. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. Clearing All Selections Choose [Clear All Selections]. ● In..

All selections will be cleared. - Page 154

Print Added Images 154 All selections will be cleared. ● Press the qr buttons or turn the Ê dial to choose [OK], then press the m button. You can print images added to the print list by connecting the camera to a PictBridge compliant printer (pp. 150 – 153) . Connect the camera to the printer. ● Follow Steps 1 to 4 on p. 148 . Print. ● Press the op buttons to choose [Print now], then press the m button. X Printing will start. ● If you stop the printer during printing and start again, it will start from the next print. Print Added Images Number of copies to print

..

Customizing Camera Settings - Page 155

155 Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes. 9

..

Changing Camera Settings - Page 156

156 You can customize convenient and commonly used functions from the 3 tab (p. 47) . Changing Sounds You can change each of the camera’s operation sounds. ● Choose [Sound Options], then press the m button. ● Press the op buttons or turn the Ê dial to choose an option. ● Press the qr buttons to choose an option. Turning off Hints & Tips When you choose an item in the ø menu (p. 46) or MENU (p. 47) , a description of the function (hints and tips) is displayed. You can turn off this function. ● Choose [Hints & Tips], then press the qr buttons to choose [Off]. Changing Came..

Changing the Start-up Screen - Page 157

Changing Camera Settings 157 Changing the Start-up Screen You can change the start-up screen that appears when you turn on the camera. ● Choose [Start-up Image], then press the m button. ● Press the qr buttons or turn the Ê dial to choose an option. Registering Recorded Images as the Start-up Screen When you press the 1 button and set the camera to Playback mode, you can register an image. ● Choose [Start-up Image], then press the m button. ● Press the qr buttons or turn the Ê dial to choose [3], then press the m button. ● Press the qr buttons or turn the Ê dial to choose an im..

Register the start-up image or sounds with the included - Page 158

Changing Camera Settings 158 Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 – 9999, and saved to folders of up to 2,000 images. You can change the file number assignment. ● Choose [File Numbering], then press the qr buttons to choose an option. Register the start-up image or sounds with the included software The dedicated operation sounds and start-up images on the included software can be registered to the camera. Refer to the Software Guide for details. Continuous Even if you shoot using a new memory..

Creating Folders by Shooting Date - Page 159

Changing Camera Settings 159 Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. ● Choose [Create Folder], then press the qr buttons to choose [Daily]. ● Images will be saved into folders created on each shooting date. Changing the Lens Retract Time For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode (p. 27) . If you want the lens to retract immediately when you press the 1 button, set the retract time to [0 sec.]. ● Choose [Lens Retract], then pr..

Setting the Screen Shut-Off Time - Page 160

Changing Camera Settings 160 Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 51) . This also works when [Auto Power Down] is set to [Off]. ● Choose [Power Saving], then press the m button. ● Press the op buttons or turn the Ê dial to choose [Display Off], then press the qr buttons to choose a time. ● In order to save battery power, you should choose less than [1 min.]. Using the World Clock When travelling abroad, you can record images with local dates and times simply by switching the time zone setting. If you pre-register the ..

Changing Camera Settings - Page 161

Changing Camera Settings 161 Set the world time zone. ● Press the op buttons or turn the Ê dial to choose [ World], then press the m button. ● Press the qr buttons or turn the Ê dial to choose the destination time zone. ● You can also set the daylight saving time as in Step 1. ● Press the m button. Choose the world time zone. ● Press the op buttons or turn the Ê dial to choose , then press the n button. X will appear on the shooting screen (p. 178) . Changing Distance Units You can change the distance units that display in the MF indicator (p. 93) from m/cm to ft/in. ● Choose..

Changing Shooting Function Settings - Page 162

162 If you set the mode dial to G , you can change the settings in the 4 tab (p. 47) . Turning Off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp. ● Choose [AF-assist Beam], then press the qr buttons to choose [Off]. Changing the Flash Timing You can change the timing of the flash and shutter. ● Choose [Flash Settings], then press the m button. ● Press the op buttons or turn the Ê dial to choose [Shutter Sync.], then press the qr buttons to choose a setting. Before at..

Turning Off the Red-Eye Reduction Function - Page 163

Changing Shooting Function Settings 163 Turning Off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function. ● Choose [Flash Settings], then press the m button. ● Press the op buttons or turn the Ê dial to choose [Red-Eye Lamp], then press the qr buttons to choose [Off]. Changing the Image Display Time Right After Shooting You can change the length of time the images display right after shooting. ● Choose [Review], then press the qr buttons to cho..

Changing the Way the Image Displays Right After - Page 164

Changing Shooting Function Settings 164 Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting. ● Choose [Review Info], then press the qr buttons to choose an option. Customizing Display Information You can change which information is displayed by switching between custom displays with each press of the l button. ● Choose [Custom Display], then press the m button. ● Press the opqr buttons or turn the Ê dial to choose an item, then press the m button. will appear on items that display. X Items with will display. ● To t..

Changing Shooting Function Settings - Page 165

Changing Shooting Function Settings 165 Changing the IS-Mode Settings ● Choose [IS Mode], then press the qr buttons to choose an option. If you press the shutter button halfway and return to the shooting screen from the custom display settings screen, the settings will not be saved. • Gray items can also be set, however, they may not appear depending on the Shooting mode. • Grid lines will not be recorded on the image. Continuous Image stabilization is always on. You can confirm the effects directly on the display, which makes it easier to check the composition or focus. It not only r..

Press any button other than the ON/OFF button - Page 166

Changing Shooting Function Settings 166 Registering Functions to the Button ● Choose [Set Shortcut button], then press the m button. ● Press the opqr buttons or turn the Ê dial to choose the functions to register, then press the m button. ● Pressing the button will call up the registered function. • Choose if you want to return the button to default settings. • When this symbol is shown on the bottom right of an icon, the function cannot be used in the current Shooting mode or function setting. • In , each press of the button records white balance data (p. 82) , and the white b..

Registering Commonly Used Shooting - Page 167

167 You can register up to 5 items from commonly used shooting menus to the tab, letting you quickly access these items from a single screen. Choose [My Menu settings]. ● Choose [My Menu settings] in the tab, then press the m button. Choose the menu items to register. ● Press the op buttons or turn the Ê dial to choose [Select items], then press the m button. ● Press the op buttons or turn the Ê dial to choose a menu to register (up to 5), then press the m button. X will appear. ● To cancel registration, press the m button, and will disappear. ● Press the n button. Change the or..

Choosing the Image that First Displays in - Page 168

Changing Playback Function Settings 168 You can adjust the settings in the 1 tab by pressing the 1 button (p. 47) . Choosing the Image that First Displays in Playback ● Choose [Resume], then press the qr buttons to choose an option. • Gray items in Step 2 can also be set, however, they may not be available depending on the Shooting mode. • Choose [Set default view] and press the qr buttons to choose [Yes]. My Menu can now be displayed by pressing the n button when in a Shooting mode. Changing Playback Function Settings Last seen Resumes with the image last viewed. Last shot Resumes wi..

Useful Information - Page 169

169 Useful Information This chapter introduces how to use the AC adapter kit and Eye-Fi card (both sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen. 10

..

Using Household Power - Page 170

170 If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the camera without worrying about how much charge is left in the battery. Turn off the camera. Insert the coupler. ● Follow Step 2 on p. 17 to open the cover, then insert the coupler as shown until it locks into place with a click. ● Follow Step 5 on p. 17 to close the cover. Plug the cord into the coupler. ● Open the cover and fully insert the plug into the coupler. Connect the power cord. ● Connect the power cord to the compact power adapter, then plug the other end into a power outlet. ● Turn the camera on to..

Using an Eye-Fi Card - Page 171

171 Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is authorized in the country or territory of use (p. 16) . When you put a prepared Eye-Fi card into the camera, you can automatically transfer your images wirelessly to a computer, or upload them to a web service. Image transfer is a function of the Eye-Fi card. For details on how to setup and use the card, and concerning problems transferring images, please refer to the Eye-Fi card user guide, or contact the manufacturer. If you put an Eye-Fi card into the camera, the connection status can be checked in the shooting ..

What if [Eye-Fi Settings] does not appear? - Page 172

Using an Eye-Fi Card 172 Checking Connection Information You can check the Eye-Fi card’s access point SSID, or connection status. Choose [Connection info]. ● Press the n button, then choose [Eye-Fi Settings] from the 3 tab, and press the m button. ● Press the op buttons or turn the Ê dial to choose [Connection info], then press the m button. X The Connection info screen will appear. Disabling Eye-Fi Transfer You can set the card to disable Eye-Fi transfer. Choose [Disable] in [Eye-Fi trans.]. ● Press the n button to choose [Eye-Fi Settings] from the 3 tab, then press the m button. ..

Troubleshooting - Page 173

173 If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the ON/OFF button, but nothing happened. • Confirm that the battery is the correct type, and is not depleted (p. 15) . • Confirm that the battery is properly inserted (p. 17) . • Confirm that the memory card/battery cover is securely closed (p. 17) . • If the battery terminals are dirty, battery performance will decrease. Clean the terminals with a co..

Troubleshooting - Page 174

Troubleshooting 174 Image is blurred. • Press the shutter button halfway to focus on the subject, then press fully to shoot (p. 23) . • Shoot the subject within the focusing distance (p. 188) . • Set the [AF-assist Beam] to [On] (p. 162) . • Confirm that functions which you do not intend to use (macro, etc.) are not set. • Shoot using the focus lock or AF lock (pp. 86 , 90) . Even when you press the shutter button halfway, the AF frame does not appear, and the camera does not focus. • If you center on the light and dark contrasting area of the subject and push the shutter button..

Troubleshooting - Page 175

Troubleshooting 175 Recording images to the memory card takes a long time, or continuous shooting slows down. • Perform a low-level format of the memory card in the camera (p. 51) . Cannot make settings for shooting functions or ø menu. • The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 182 – 185) . Shooting movies Correct shooting time does not display, or stops. • Format the memory card in the camera, or use a memory card capable of recording at high speeds. Even wh..

List of Messages That Appear on the Screen - Page 176

176 If error messages appear on the screen, try one of the following solutions. No memory card • The memory card is not installed in the correct direction. Install the memory card in the correct direction (p. 17) . Memory card locked • The SD memory card, SDHC memory card or SDXC memory card’s or Eye-Fi card's write protect tab is set to “LOCK”. Unlock the write protect tab (pp. 16 , 17) . Cannot record! • You attempted to shoot an image without a memory card. Install the memory card in the correct direction to shoot (p. 17) . Memory card error (p. 51) • If the same message ap..

List of Messages That Appear on the Screen - Page 177

List of Messages That Appear on the Screen 177 Invalid selection range • When choosing the selection range (pp. 133 , 137 , 140 , 153) , you tried to choose a starting image that was after the last image or you tried to choose an ending image that was before the starting image. Exceeded selection limit • You chose more than 998 images in print settings. Choose less than 998 images (p. 152) . • Print settings could not be saved correctly. Reduce the number of selected images and try again (p. 152) . • You chose 501 or more images in Protect (p. 132) , Erase (p. 136) , Favorites (p. 1..

Information Displayed on the Screen - Page 178

178 Shooting (Information Display) * : Standard, : Held vertically When shooting, the camera detects if it is held vertically or horizontally, and adjusts settings accordingly for the best shot. It also detects orientation during playback, so you can hold the camera in either orientation and it will automatically rotate images for correct viewing. This function may not operate correctly when the camera is pointed straight up or down. Information Displayed on the Screen Battery Charge Indicator (p. 15) Camera Orientation* White Balance (p. 82) White Balance Correction (p. 83) My Colors (p. 8..

Scene Icons - Page 179

Information Displayed on the Screen 179 Scene Icons In A mode, the camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color. * Appears when the scene is dark and the camera is attached to a tripod. Subject People Non-Human Subjects/ Landscapes Close Subjects Icon Background Color Back ground When Moving With Strong Facial Shadows Bright Gray Backlit — Including Blue Skies Light Blue Backlit — Sunsets — — Orange Spotlights Dark Blue Dark When Using Tripod * — * —

..

Playback (Detailed Information Display) - Page 180

Information Displayed on the Screen 180 Playback (Detailed Information Display) RGB Histogram (p. 45) My Category (p. 139) Shooting mode (p. 182) ISO Speed (p. 80) , Playback Speed (Movies) (p. 115) Exposure Compensation (p. 74) , Exposure Shift Amount (p. 117) White Balance (p. 82) Histogram (p. 45) Image Editing (pp. 142 – 146) Compression (Image Quality) (p. 76) / Recording Pixels (pp. 76 , 116 ), RAW (p. 78) , MOV (Movies) Print List (pp. 150 , 151) Eye-Fi Transfer Complete (p. 171) Battery Charge Indicator (p. 15) Metering Method (p. 95) Folder Number – File Number (p. 158) Display..

Handling Precautions - Page 181

181 • This camera is a high-precision electronic device. Do not drop it or subject it to strong impacts. • Never place the camera close to magnets, motors or other devices that generate strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. • If water droplets or dirt become stuck on the camera or screen, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force. • Never use cleaners containing organic solvents to wipe the camera or screen. • Use a commercially available blower brush to remove dust from the len..

Functions Available in Each Shooting Mode - Page 182

182 *1 The available settings depend on the registered shooting modes. *2 The number of shots cannot be specified, and the time delay cannot be set to 0 seconds. *3 Not selectable but switches to … depending on the circumstances. *4 Not selectable, but switches to … whenever flash fires. *5 White Balance data not recordable. *6 h not available. Shooting modes D B M G A Function Set Control Ring Func. (p. 103) *1 { { { { — — Exposure Compensation (p. 74) *1 — { { { — { Self-Timer (p. 59) *1 { { { { { { *1 { { { { { { Flash (pp. 54 , 75 , 106) *1 — — — { { { *1 { { { { — ..

Functions Available in Each Shooting Mode - Page 183

Functions Available in Each Shooting Mode 183 *7 . *8 will appear as the recording pixel setting, and the image will be fixed at 1824 x 1368 pixels. It will be possible to select a compression ratio (image quality) setting. *9 Recording pixel setting not selectable. { Selectable, or set automatically. – Not selectable. K E I J V TY w S O P t xv E >z — — — — — — — — — — — — — — — — — — — — — — { { { { { { { — — — { { { { { { { { { — — — { { { { { { { { { { { { { { { { { { { { { { { { { — — — { { *2 — { *2 *2 { { { { { *2 *2..

Flash Exp.Comp - Page 184

184 4 Shooting Menu *1 The available settings depend on the registered shooting modes. *2 AiAF *3 Not selectable, but can be enabled with the o button (p. 24) . *4 [On] when movement is detected. *5 Always [On]. Shooting modes D B M G A Function AF Frame (p. 88) Center *1 { { { { — { Face AiAF *1 { { { { { { Tracking AF *1 { { { { *3 { AF Frame Size (p. 88) Normal/Small *1 { { { { — — Digital Zoom (p. 55) Standard *1 { { { { { — Off *1 { { { { { { Digital Tele-converter (1.4x/2.3x) *1 { { { { { — AF-Point Zoom (p. 91) On/Off *1 { { { { { { Servo AF (p. 94) On/Off *1 { { { { *4 { A..

Menus - Page 185

Menus 185 *6 [Off] when flash fires. *7 Only available when [Grid Lines] selected. *8 Only available when selected in Custom Display. *9 Always [Continuous]. { Selectable, or set automatically. – Not selectable K E I J V TY w S O P t xv E >z { { { — — — { { { — { { — { { { { { { — — — { { { { { { { { { { { — — { { { { — — *2 *2 *2 { { { — — — { { { — { — — { { { { — — — — — — — — — — — — — — — — — — — — — — — — — — — { { { { { { { { — — — — — { { { { { — { — — { { { { { { { { { { {..

Set up Menu - Page 186

Menus 186 3 Set up Menu My Menu Menu Item Content Ref. Page Mute On/Off* p. 48 Volume Set all operation sounds (5 levels). p. 48 Sound Options Set the sounds for each camera operation. p. 156 Hints & Tips On*/Off p. 156 LCD Brightness Set within a range of ±2. p. 49 Start-up Image Add an image as a start-up image. p. 157 Format Formats memory card, erasing all data pp. 22 , 51 File Numbering Continuous*/Auto Reset p. 158 Create Folder Monthly*/Daily p. 159 Lens Retract 1 min.*/0 sec. p. 159 Power Saving Auto Power Down: On*/Off Display Off: 10, 20 or 30 sec./1*, 2 or 3 min. pp. 51 , 15..

Playback Menu - Page 187

Menus 187 1 Playback Menu 2 Print Menu Item Content Ref. Page Smart Shuffle Starts Smart Shuffle. p. 127 Slideshow Plays back images automatically. p. 125 Erase Erases images (Select, Select Range, All Images). p. 136 Protect Protects images (Select, Select Range, All Images). p. 132 Rotate Rotates images. p. 141 Favorites Tags or untags images as favorites. p. 138 My Category Categorizes images (Select, Select Range). p. 139 i-Contrast Corrects dark portions and contrast in still images. p. 145 Red-Eye Correction Corrects red eyes in still images. p. 146 Trimming Trims portions of still im..

Specifications - Page 188

188 Image Sensor Camera Effective Pixels ..... Approx. 10.0 million pixels Lens Focal Length ...................... 3.8x zoom: 6.0 (W) – 22.5 (T) mm (35mm film equivalent: 28 (W) – 105 (T) mm) Focusing Range ................. 5 cm (2.0 in.) – infinity (W), 30 cm (12 in.) – infinity (T) • Macro: 5 – 50 cm (W), 30 – 50 cm (T) (2.0 in. – 1.6 ft. (W), 12 in. – 1.6 ft. (T)) Image Stabilizer System .......... Lens-shift type Imaging Processor .................. DIGIC4 LCD Monitor Type ................................... TFT color (wide viewing angle type) Size ....................

Specifications - Page 189

Specifications 189 Digital Zoom ............................ Still images/Movies: Approx. 4.0x (up to approx. 15x in combination with the optical zoom) Safety Zoom, Digital tele- converter Continuous Shooting Mode .................................. Normal, AF, LV Speed (Normal) .................. Approx. 1.9 shots/sec. (In P mode) Approx. 3.9 shots/sec. (In Low Light mode) Number of Shots (Approximate) (CIPA compliant) ..................... Approx. 200 shots Recording Media ..................... SD memory card, SDHC memory card, SDXC memory card MultiMediaCard, MMC plus card, HC MMC plus ca..

All data is based on tests by Canon. - Page 190

Specifications 190 Battery Pack NB-6L Type ........................................ Rechargeable lithium-ion battery Voltage .................................... 3.7 V DC Capacity .................................. 1000 mAh Charging cycles ....................... Approx. 300 times Operating temperature ............ 0 – 40 °C (32 – 104 °F) Dimensions .............................. 34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.) Weight ..................................... Approx. 21 g Battery Charger CB-2LY/2LYE Rated input .............................. 100 – 240 V AC (50/60 Hz), 0.08..

Index - Page 191

191 A AC Adapter Kit .................................. 38 , 170 Accessories .............................................. 38 AE Lock ............................................ 96 , 117 AEB Mode ................................................ 97 AF Frames .......................................... 25 , 88 AF J Focus .......................... 25 , 88 , 90 , 178 AF Lock ............................................ 90 , 178 AF-Point Zoom ......................................... 91 Aspect Ratio ............................................. 79 AUTO Mode (Shooting Mode) ............ 24 , 42..

Index - Page 192

Index 192 Flash Exposure Compensation ....... 106 Off ...................................................... 54 On ...................................................... 75 Slow Synchro ................................... 106 Focal Lengths ........................................... 57 Focus AF Frame ..................................... 25 , 88 AF Lock ............................................. 90 AF-Point Zoom .................................. 91 Face Select ........................................ 92 Servo AF ............................................ 94 Focus Check .................

Index - Page 193

Index 193 Portrait (Shooting Mode) .......................... 61 Poster Effect (Shooting Mode) ................. 63 Power J Battery and Charger Kit, AC Adapter Kit Power Saving ................................... 51 , 159 Printing ................................................... 148 Program AE .............................................. 74 Protect .................................................... 132 R RAW ......................................................... 78 Recording Pixels (Image Size) ................. 76 Red-Eye Correction ........................ 105 , 146 Resizing (Ma..

CEL-SP9GA210 - Page 194

Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products. CEL-SP9GA210 © CANON INC. 2010

..
Camera User Guide
ENGLISH
Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
Store this guide safely so that you can use it in the future.


Related Models

There are Total 2 Manuals For PowerShot S95.